エラーが発生しました。 詳細 隠す
保存されていないページがあります。 復元 取り消す

Eurostat

Eurostat is the statistical office of the European Union situated in Luxembourg. Its task is to provide the European Union with statistics at European level that enable comparisons between countries and regions and to promote the harmonisation of statistical methods across EU member states and candidates for accession as well as EFTA countries.

すべてのデータセット:  E I P
  • E
    • 10月 2019
      ソース: Eurostat
      アップロード者: Knoema
      以下でアクセス: 17 10月, 2019
      データセットを選択
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.
    • 9月 2016
      ソース: Eurostat
      アップロード者: Knoema
      以下でアクセス: 19 9月, 2016
      データセットを選択
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.
    • 10月 2019
      ソース: Eurostat
      アップロード者: Knoema
      以下でアクセス: 17 10月, 2019
      データセットを選択
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.
  • I
    • 10月 2019
      ソース: Eurostat
      アップロード者: Knoema
      以下でアクセス: 17 10月, 2019
      データセットを選択
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.
    • 10月 2019
      ソース: Eurostat
      アップロード者: Knoema
      以下でアクセス: 01 11月, 2019
      データセットを選択
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.
  • P
    • 11月 2019
      ソース: Eurostat
      アップロード者: Knoema
      以下でアクセス: 13 11月, 2019
      データセットを選択
      Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

当社の個人情報保護方針&クッキーポリシー

当社のウェブサイトではクッキーを使用し、ユーザー様のオンライン体験を向上させております。このウェブサイトを立ち上げたときに、クッキーはお使いのコンピュータ上に配置されます。インターネットブラウザの設定を通して、個人的なクッキーの設定を変更できます。

個人情報保護方針