Organisation for Economic Co-operation and Development

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilizers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

commitment is a firm written obligation by a government or official agency, backed by the appropriation or availability of the necessary funds, to provide resources of a specified amount under specified financial terms and conditions and for specified purposes for the benefit of a recipient country or a multilateral agency. Members unable to comply with this definition should explain the definition that they use. -- Commitments are considered to be made at the date a loan or grant agreement is signed or the obligation is otherwise made known to the recipient (e.g. in the case of budgetary allocations to overseas territories, the final vote of the budget should be taken as the date of commitment). For certain special expenditures, e.g. emergency aid, the date of disbursement may be taken as the date of commitment. -- Bilateral commitments comprise new commitments and additions to earlier commitments, excluding any commitments cancelled during the same year. Cancellations and reductions in the year reported on of commitments made in earlier years are reported in the CRS, but not in the DAC questionnaire. -- In contrast to bilateral commitments, commitments of capital subscriptions, grants and loans to multilateral agencies should show the sum of amounts which are expected to be disbursed before the end of the next year and amounts disbursed in the year reported on but not previously reported as a commitment. For capital subscriptions in the form of notes payable at sight, enter the expected amount of deposits of such notes as the amount committed.

Destination of Official Development Assistance Disbursements. Geographical breakdown by donor, recipient and for some types of aid (e.g. grant, loan, technical co-operation) on a disbursement basis (i.e. actual expenditures). The data cover flows from bilateral and multilateral donors which focus on flows from DAC member countries and the EU Institutions.

This dataset contains bilateral commitment data on aid in support of environment sustainability and aid to biodiversity, climate change mitigation, climate change adaptation and desertification from the Development Assistance Committee (DAC) Creditor Reporting System (CRS) database. In their reporting to the DAC CRS, donors are requested to indicate for each activity whether or not it targets environment and the Rio Conventions (biodiversity, climate change mitigation, climate change adaptation and desertification). A scoring system of three values is used, in which aid activities are "marked" as targeting environment as the "principal objective" or a "significant objective", or as not targeting the objective. The environment marker identifies activities that are "intended to produce an improvement in the physical and/or biological environment of the recipient country, area or target group concerned" or "include specific action to integrate environmental concerns with a range of development objectives through institution building and/or capacity development". A large majority of activities targeting the objectives of the Rio Conventions fall under the DAC definition of "aid to environment". The Rio markers permit their specific identification.

This dataset contains commitment data (since 2002) and disbursement data (since 2009) on aid in support of gender equality from the CRS database. In their reporting to the Development Assistance Committee (DAC) Creditor Reporting System (CRS), donors are requested to indicate for each activity whether or not it targets gender equality as one of its policy objectives. To qualify as “gender equality focussed,” an activity must explicitly promote gender equality and women’s empowerment. An activity can either target gender equality as its “principal objective” or as a “significant objective”. A “principal” score (2) is assigned if gender equality was an explicit objective of the activity and fundamental to its design - i.e. the activity would not have been undertaken without this objective. A “significant” score (1) is assigned if gender equality was an important, but secondary, objective of the activity - i.e. it was not the principal reason for undertaking the activity. A “not targeted” score (0) is assigned if, after being screened against the gender equality policy marker, an activity is not found to target gender equality. Activities assigned a “principal objective” score should not be considered better than activities assigned a “significant objective” score, as donors that mainstream gender equality - and thus integrate it into their projects across a range of sectors - are more likely to allocate the marker score “significant” to their aid activities. The gender equality marker allows an approximate quantification of aid flows that target gender equality as a policy objective. In marker data presentations the figures for principal and significant objectives should be shown separately and the sum referred to as the “estimate” or “upper bound” of gender equality-focussed aid. An activity can have more than one principal or significant objective. Therefore, total amounts targeting the different objectives should not be added-up to avoid double-counting. Policy markers seek information on the donor’s policy objectives which can be best assessed at the design stage of projects. This is why policy markers are applied to commitments. Policy marker data on a disbursement basis can also be compiled, but it is important to note that this does not mean the policy objectives of projects under implementation would have been re-assessed. Rather, the disbursements are linked to the qualitative information on the original commitment through project identifiers. Consequently, a project marked as gender equality focussed at the commitment stage will be flagged as gender equality focussed throughout its lifetime, unless the qualitative information was changed. Activity-level gender equality marker data that underlie the aggregate figures presented in this dataset are available for consultation and download: see “Export”, “Related files”.

This database includes annual, quarterly and monthly information on carbon dioxide (CO2) emissions related to commercial passenger, freight, and general aviation flights, on both a territory and a residence basis, for 186 countries. These CO2 emissions are estimated by the OECD, based on a consistent methodology across countries. The main source used for the estimation of these CO2 emissions is a database compiled by the International Civil Aviation Organisation (ICAO) with all commercial passenger and freight flights around the world.

Data source used: The aquaculture production data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.

Since the collection of 2009 data, the scope of the OECD Global Insurance Statistics questionnaire has been expanded. These changes led to the collection of key balance sheet and income statement items for direct insurance and reinsurance sectors, such as: gross claims paid, outstanding claims provision (changes), gross operating expenses, commissions, total assets, gross technical provisions (of which: unit-linked), shareholder equity, net income.

This dataset present the Balanced Trade in Services (BaTIS) dataset published by OECD. It is a complete, consistent and balanced matrix of international trade in services statistics (ITSS). It contains annual bilateral data covering 202 reporters and partners, broken down by the 12 main EBOPS2010 (BPM6) categories.

This dataset presents a set of bibliometric indicators calculated using Elsevier's Scopus Custom Data, Version 5.2019; and Scimago Journal Rankings are used to calculate the top 10% most cited scientific publications.Elsevier assigns each journal in Scopus to one or more subjects using its All Science and Journal Classification (ASJC). There are 27 main fields comprising 334 subjects in the classification.This dataset is a small sample of the bibliometric indicators calculated using the Scopus Database. Different indicators will be presented in the Scoreboard platform (forthcoming).The following indicators are presented:FPUBS_NBFRAC: Total number of scientific publications, fractional counts. Publications are attributed to countries on the basis of the authors' institutional affiliations. Publications were fractionalised by contributing units; so that reported figures add up to the total number of publications (each document has the same weight). Fractional counts can be aggregated.TOP10FPUBS_NBFRAC: Total number of 10% top-cited scientific publications, fractional counts. The top 10% most cited documents is an indicator of excellence. This rate indicates the amount (in percentages) of a unit's scientific output that is included into the group of the 10% of the most cited papers in their respective scientific fields. It is a measure of high quality of research output of a unit, in this case the country. The indicator of scientific excellence is calculated at the document level using fractional counts. Documents organized by document type, ASJC field and year - are sorted in descending order based on the number of citations received. A threshold of 10% most cited documents is calculated for each category. Only documents with a fixed number of citations above the threshold are included. Documents with the same number of citations as the threshold are sorted according to the Scimago Journal Rankings (SJR) value of the journal in which they were published; those with the highest scores are selected. The citation window is based on the whole period, so top 10% most cited documents for the reference year uses whole period citations. No citation window is imposed as citation-based indicators are calculated on the basis of comparisons with documents published in the same year. The world average is 10% for the period.TOP10_X: The top 10% most cited documents is an indicator of excellence. This rate indicates the amount (in percentages) of a unit's scientific output that is included into the group of the 10% of the most cited papers in their respective scientific fields. The world average is 10% for the period.INTL_X: Percentage of scientific publications involving international collaboration. International collaboration refers to publications co-authored among institutions in different countries. Estimates are computed for each country by counting documents for which the set of listed affiliations includes at least one address within the country and one outside. Single-authored documents with multiple affiliations in different countries count as international collaboration.ISCORR_X: Percentage of corresponding/leading author scientific publications. Percentage corresponding or leading author documents, i.e. the share of scientific output where a domestic author is listed as a corresponding author. The scientific leadership indicator helps interpret the role of a given country in collaboration activities. The scientific leadership indicator shows the share of scientific output (in this case, documents by authors from a given country) where an author from this country is listed as leading author.NORMCIT_X: Normalised citation score, ratio of actual versus expected publications, percentage. Because of the differences in citation patterns of the fields and document types, field-based normalisation is required. The measure of normalised citation impact shows the relationship of the unit's average citation to the world's average, the unit is the country. The indicator is derived as the ratio between the average number of citations received by the documents published by authors affiliated to an institution in a given country and the world average of citations, over the same time period, by document type and subject area. Its value indicates how many times above (or below) the document has been cited above (or below) world average. For example, a value of 80 means the country is cited 20% below world average in that field and 130 means the country is cited 30% above average for that domain. The normalisation of citation values is item-oriented, i.e. carried out at the level of the individual document. If an article has been published in a journal allocated to more than one subject area, a mean value of the areas is calculated. The world average is 100.SPEC_I: The Relative Specialisation Index measures relative specialisation. This index is calculated by dividing all papers in a field from country a by the total production in all fields for country a, this proportion is then divided by the same proportion calculated at the world level. The world average is 1. A threshold has been set and the index has only been calculated for countries with 50 or more documents.

STAN Bilateral Trade Database by Industry and End-use category (BTDIxE) provides values of imports and exports (as well as re-imports and re-exports) of goods broken down by industrial sectors and by end-use categories. BTDIxE was designed to extend the old BTD database which provided bilateral trade in goods by industry only.  BTDIxE allows, for example, insights into the patterns of trade in intermediate goods between countries to track global production networks and supply chains, and it helps to address policy issues such as trade in value added and trade in tasks.  The database presents estimates of bilateral flows of goods from 1990 to the latest available year, i.e. 2018; the latest year shown is subject to the availability of underlying product-based annual trade statistics.  Reporters are the OECD member countries and a large number of non-OECD economies, including the BRIICS: Brazil, the Russian Federation, India, Indonesia, People's Republic of China and South Africa; other selected G20 and Asian economies; and major African and Latin American nations.  It should be noted that starting from mid-2012, the OECD and the United Nations agreed to centralise the data collection and processing procedures within UNSD Comtrade.  The list of partners covers the OECD countries, more than a hundred of non-member economies as well as the partners "World", "Rest of the World" and "Unspecified". The partner "Total foreign trade" corresponds to the flows with partner "World" excluding intra-country flows. Trade flows are divided into economic activities based on the Revision 4 of ISIC and nine end-use categories including capital goods, intermediate goods and household consumption.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Business written in the reporting country on a gross and net premium basis. It contains a breakdown between domestic companies, foreign-controlled companies and branches and agencies or foreign companies.

OECD Indicators on Carbon dioxide (CO2) emissions embodied in international trade (TeCO2) are derived by combining the 2021 editions of OECD Inter-Country Input-Output (ICIO) Database and of International Energy Agency (IEA) statistics on CO2 emissions from fuel combustion. In this release of TeCO2, emissions from fuels used for international aviation and maritime transport (i.e. aviation and marine bunkers) are also considered.Production-based CO2 emissions are estimated by allocating the CO2 emissions to the 45 target industries in OECD ICIO and, to household final consumption of fuels, by both residents and non-residents.Demand-based CO2 emissions are calculated by multiplying the intensities of the production-based emissions (c) with the global Leontief inverse (I-A)(-1) and global final demand matrix (Y) from OECD ICIO, taking the column sums of the resulting matrix and adding residential and private road emissions (FNLC), i.e. direct emissions from final demand: colsum [ diag(c) (I-A)(-1) Y ] + FNLC.For more information, see TeCO2 web page: http://oe.cd/io-co2.

This indicator reports the amount of carbon emissions from fossil fuel combustion embodied in imports and exports in mega tonnes of CO2 (MtCO2) for 63 countries and 34 industries between 1995 and 2011.

The indicator reports the hypothetical amount of carbon emissions from fossil fuel combustion embodied in imports if imported goods were produced with a carbon intensity (i.e. emissions factors) equal to that of the importing country at a given time – the Equal Carbon Intensity (ECI) assumption. It covers 65 countries and 34 industries between 1995 and 2011.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Commissions in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

This dataset provides information on the level of public equipment installed by countries to managed and abate water pollution. It shows the percentage of national population connected to "public" sewerage networks and related treatment facilities, and the percentage of national population connected to "public" wastewater treatment plants, and the degree of treatment. Connected here means actually connected to a wastewater plants through a public sewage network. When analysing these data, it should be kept in mind that the optimal connection rate is not necessarily 100%. It may vary among countries and depends on geographical features and on the spatial distribution of habitats. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)

Note: CPA data for 2018 and 2019 are projections from the 2016 Survey on Forward Spending Plans. Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

The country statistical profiles provide a broad selection of indicators, illustrating the demographic, economic, environmental and social developments, for all OECD members. The dataset also covers the five key partner economies with which the OECD has developed an enhanced engagement program with (Brazil, China, India, Indonesia and South Africa) ,accession countries (Colombia, Costa Rica and Lithuania) , Peru and the Russian Federation. The user can easily compare indicators across all countries. Total fertility rates - Unit of measure used: Number of children born to women aged 15 to 49

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business datawhere composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Click to collapse Item coverage Outstanding investment by direct insurance companies, classified by investment category, by the companies' nationality and by its destination (domestic or foreign). As of 2009, investment data exclude assets linked to unit-linked products sold to policyholders.

The OECD Digital STRI identifies, catalogues and quantifies barriers that affect trade in digitally enabled services across 46 countries. It provides policy makers with an evidence-based tool that helps to identify regulatory bottlenecks, design policies that foster more competitive and diversified markets for digital trade, and analyze the impact of policy reforms. The OECD Digital STRI captures cross-cutting impediments that affect all types of services traded digitally. As a stand-alone instrument, it complements the OECD Services Trade Restrictiveness Index (STRI).   STRI indices take the value from 0 to 1. Complete openness to trade and investment gives a score of zero, while being completely closed to foreign services providers yields a score of one.

The OECD Digital STRI heterogeneity indices complement the recently published Digital STRI's and presents indices of regulatory heterogeneity based on the rich information in the Digital STRI regulatory database. The indices are built from assessing – for each country pair and each measure – whether or not the countries have the same regulation. For each country pair and each sector, the indices reflect the (weighted) share of measures for which the two countries have different regulation.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010.Other commentsThe Task Force on Statistics of International Trade in Services maintains a matrix summarising the status of the trade in services data collection performed by International Organisations. The table displays links to the databases as well as update timetables, availability of metadata, availability of bilateral data, and other important characteristics.

The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments and government debt. For the non-OECD regions, foreign trade and current account series are available. Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was June 1, 2023. The aggregation of world trade takes into account the projections made for the main non-OECD economies. Thus, besides OECD and the OECD euro area, the following regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Algeria, Angola, Azerbaijan Bahrain, Brunei, Chad, Rep. of Congo, Ecuador, Equatorial Guinea, Gabon, Iran, Iraq, Kazakhstan, Kuwait, Libya, Nigeria, Oman, Qatar, Saudi Arabia, Sudan, Timor-Leste, Trinidad and Tobago, Turkmenistan, United Arab Emirates, Yemen, Venezuela); with the remaining countries in a residual 'Rest of the World' group.

The classification of personnel is based on functions and organises staff into four main functional categories: 1) Instructional Personnel; including two sub-groups: A. Classroom Teachers (ISCED 0-4) and Academic Staff (ISCED 5-6); and B. Teacher Aides (ISCED 0-4) and Teaching / Research Assistants (ISCED 5-6); 2) Professional Support for Students; including two sub-groups: A. Pedagogical Support (ISCED 0-4) and Academic Support (ISCED 5-6); B. Health and Social Support (ISCED 0-6); 3) Management/Quality Control/Administration; including four subgroups: A. School Level Management (ISCED 0-6); B. Higher Level Management (ISCED 0-6); C. School Level Administrative Personnel (ISCED 0-6); and D. Higher Level Administrative Personnel (ISCED 0-6); 4) Maintenance and Operations Personnel.

This dataset provides selected information on national emissions of air pollutants: man-made emissions of sulphur oxides (SOx), nitrogen oxides (NOx), particulate matter (PM), carbon monoxide (CO) and volatile organic compounds (VOC). Categories presented are based on the NFR (nomenclature for reporting) 2014 classification. 

The Fisheries Committee (COFI) from the Trade and Agriculture Directorate (TAD) collects, on an annual basis from all its participating countries, data on landings, aquaculture production, fleet, employment in the fisheries sector, and government financial transfers. Data are collected from Fisheries Ministries, National Statistics Offices and other institution designated as an official data source. Concepts Classifications Data are collected by the OECD using the methodologies established by the Coordinating Working Party on Fishery Statistics (CWP) (www.fao.org/fishery/cwp/search/en). This inter-agency body, created in 1960 to develop common procedures and standards for the collation of fisheries statistics, provides technical advice on fishery statistical matters. Its handbook of Fishery Statistical Standards comprises definitions of the various concepts used in fishery statistics, with the exception of Government Financial Transfers which is unique to the OECD. All other statistics are based on the CWP definitions. The OECD, a partner with the CWP, additionally collects information on values for its landings and records the breakdown between the types of landings (i.e. landings in domestic ports, landings in foreign ports) data series which are not collected by the FAO. While a number of countries cover landings in a similar fashion, the same does not hold true for capacity (feet/meters, GRT/engine powers), or for employment for which both Full-time equivalents or numbers of people are used. The OECD therefore does not duplicate FAO statistics but requests complementary information to feed its analytical work.

Number of students enrolled in different education programmes by country of origin and sex.

Entrepreneurship is crucial to economic development, promoting social integration and reducing inequalities. The Gender-entrepreneurship dataset presents an original collection of indicators that measure gender equality in entrepreneurship, providing an important reference for policy insights and policy making. Data refer mainly to the self-employed, their profile, age, education and sector of activity.

EAMFP growth measures the residual growth in the joint production of both the desirable and the undesirable outputs that cannot be explained by changes in the consumption of factor inputs (including labour, produced capital and natural capital). Therefore, for a given growth of input use, EAMFP increases when GDP increases or when pollution decreases. As part of the growth accounting framework underlying the EAMFP indicator, the growth contribution of natural capital and growth adjustment for pollution abatement indicators are derived: Growth contribution of natural capital - measures to what extent a country's growth in output is attributable to natural resource use; Growth adjustment for pollution abatement - measures to what extent a country's GDP growth should be corrected for pollution abatement efforts - adding what has been undervalued due to resources being diverted to pollution abatement, or deducing the ‘excess' growth which is generated at the expense of environmental quality.

Countries report expenditures by sources of funds: Governement (central, regional, local); International agencies and other foreign sources; Households and Other private entities (including firms and religious institutions and other non-profit organisations). Three types of financial transactions can be distinguished: -direct expenditure/payments on educational institutions -Intergovernmental transfers for education -Transfers to students or households and to other private entities.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) has potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. The underlying PM2.5 concentrations estimates are taken from van Donkelaar et al. (2016). They have been derived using satellite observations and a chemical transport model, calibrated to global ground-based measurements using Geographically Weighted Regression at 0.01° resolution. The underlying population data, Gridded Population of the World, version 4 (GPWv4) are taken from the Socioeconomic Data and Applications Center (SEDAC) at the NASA. The underlying boundary geometries are taken from the Global Administrative Unit Layers (GAUL) developed by the FAO, and the OECD Territorial Classification, when available. The current version of the database presents much more variation with respect to the previous one. The reason is that the underlying concentration estimates previously included smoothed multi-year averages and interpolations; while in the current version annual concentration estimates are used. Establishing trends of pollution exposure should be done with care, especially at smaller output areas, as their inputs (e.g. underlying data and models) can change from year to year. We recommend using a 3-year moving average for visualisation.

In view of the strong demand for cross-national indicators on the situation of families and children, the OECD Family Database was developed to provide cross-national indicators on family outcomes and family policies across the OECD countries, its enhanced engagement partners and EU member states. The database brings together information from various national and international databases, both from within the OECD and from external organisations. The database classifies indicators into four main dimensions: (i) structure of families, (ii) labour market position of families, (iii) public policies for families and children and (iv) child outcomes. Detailed information on the definitions, sources and methods used in the construction of the database can be found on the OECD Family Database webpage.

FDI data are based on statistics provided by 35 OECD member countries and by Lithuania. BMD4: OECD Benchmark Definition of Foreign Direct Investment - 4th Edition

This dataset FDI positions by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by partner country for OECD reporting economies.  Inward and outward FDI positions by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions.

This dataset FDI positions by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by economic activity according to ISIC4 for OECD reporting economies.

The FDI Regulatory Restrictiveness Index (FDI Index) measures statutory restrictions on foreign direct investment across 22 economic sectors. It gauges the restrictiveness of a country’s FDI rules by looking at the four main types of restrictions on FDI: 1) Foreign equity limitations; 2) Discriminatory screening or approval mechanisms; 3) Restrictions on the employment of foreigners as key personnel and 4) Other operational restrictions, e.g. restrictions on branching and on capital repatriation or on land ownership by foreign-owend enterprises. Restrictions are evaluated on a 0 (open) to 1 (closed) scale. The overall restrictiveness index is the average of sectoral scores. The discriminatory nature of measures, i.e. when they apply to foreign investors only, is the central criterion for scoring a measure. State ownership and state monopolies, to the extent they are not discriminatory towards foreigners, are not scored. The FDI Index is not a full measure of a country’s investment climate. A range of other factors come into play, including how FDI rules are implemented. Entry barriers can also arise for other reasons, including state ownership in key sectors. A country’s ability to attract FDI will be affected by others factors such as the size of its market, the extent of its integration with neighbours and even geography among other. Nonetheless, FDI rules can be a critical determinant of a country’s attractiveness to foreign investors.

The dataset Fisheries International collaboration in technology development (bilateral) provides the number of co-inventions (simple patent families) developed jointly by at least two inventors. This indicator is disaggregated by: Country - country of residence of the inventor(s), integral counted; in cases when inventors from more than two countries collaborate, this is translated into distinct bilateral relationships between country pairs. For example, if inventors from 3 countries collaborate (e.g. USA, DEU, JPN) then a unit count is assigned to 6 country pairs (USA-DEU, USA-JPN, DEU-JPN, DEU-USA, JPN-USA, JPN-DEU); in this case a country generally coordinate the project and the others are partners. Partner – country of residence of the inventor(s) who collaborate to the patent. Technology domain – the three main areas of innovation in fisheries and aquaculture, related to technology development. In detail: 1. Harvesting technology such as more effective ways to find or harvest fish and which are typically associated with improvements in catch per unit of effort (e.g. type/size of vessels and their methods of propulsion, search technologies, method of catching or harvesting fish and bringing them on board); 2.Aquaculture technology such as methods to more effectively grow fish in captivity (innovation in feeds, improving the health of aquaculture animals, etc.); 3. New products and markets such as the development of new fish products and markets (food technologies/processing such as the development of surimi as a crabmeat substitute) and the improvement of market access (secure or enlarge markets for fish products) that provides important incentives for green growth (e.g. eco-certification with fishers adopting by-catch saving technologies or modifying fishing practices and/or territorial user rights in fisheries).

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The Fisheries R&D expenditures dataset contains the budgetary expenditures in research and development on total budgetary FSE. Three variables are presented in this dataset:  • R&D expenditures - they are budgetary expenditures that finance research and development activities related to fisheries, irrespective of the institution (private or public, ministry, university, research centre or fisher group) or where they take place, the nature of research (scientific, institutional, etc.), or its purpose. The focus is on research and development expenditures on applied research related to the fisheries sector. Social-sciences research related to fisheries is included. It is also included data dissemination when associated primarily with research and development (knowledge generation), e.g. reports from research and databases developed as an adjunct to research. •FISHERIES SUPPORT ESTIMATE - Budgetary - it is the annual monetary value of gross transfers from taxpayers to fishers arising from policy measures that support fisheries, regardless of their nature, objectives or impacts. Data on FSE are collected by the Fisheries Committee (COFI) from the Trade and Agriculture Directorate (TAD) on an annual basis from all its participating countries. Data are provided by Fisheries Ministries, National Statistics Offices and other institution designated as an official data source. The original financial data is collected in national currency at current values; they are converted and published also in US dollars, for analytical purposes and to allow data comparisons. • Share of R&D expenditures on FSE - it is the share of budgetary research and development expenditures on total budgetary FSE. Please notice that total budgetary FSE is defined ‘net’, i.e. it is adjusted for costs incurred by fishers in order to receive the support. Whenever these costs are of significant amount, total budgetary FSE becomes remarkably low or negative. The corresponding share of research and development expenditures turns into a percentage exceptionally high or negative.

The OECD Fisheries Support Estimates (FSE) database is intended to be the best source of information on fisheries policies in OECD members and participating non-OECD economies.   It is designed to monitor and quantify developments in fisheries policy, to establish a common basis for policy dialogue among countries, and to provide economic data to assess the effectiveness and efficiency of policies.   These tables report country programmes data aggregated according to the main categories presented in the FSE Manual.   More detailed documentation on country programmes can be found in country-level metadata; more data on country programmes can be found in the full dataset (Excel Format - link provided below). Statistics are organized in pivot tables to make possible cross-country comparisons and to filter disaggregated policy-level data by policy implementation criteria and country.   The FSE data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies.   Data on landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

Fisheries fleet: The FAO has a two dimensional definition, of which the OECD only uses the concept of fishing vessel. Fishery Fleet: The term "fishery fleet" or "fishery vessels" refers to mobile floating objects of any kind and size, operating in freshwater, brackishwater and marine waters which are used for catching, harvesting, searching, transporting, landing, preserving and/or processing fish, shellfish and other aquatic organisms, residues and plants. Fishing vessel: The term "fishing vessel" is used instead when the vessel is engaged only in catching operations. Gross Register Tonnage: The Gross Register Tonnage represents the total measured cubic content of the permanently enclosed spaces of a vessel, with some allowances or deductions for exempt spaces such as living quarters (1 gross register ton = 100 cubic feet = 2.83 cubic metres).

The number of students enrolled refers to the count of students studying in the reference period. Each student enrolled in the education programmes covered by the corresponding category is counted once and only once. National data collection systems permitting, the statistics reflect the number of students enrolled at the beginning of the school / academic year. Preferably, the end (or near-end) of the first month of the school / academic year is chosen (special arrangements are made for part-year students who may not start studies at the beginning of the school year). Students are classified as foreign students (non-citizens) if they are not citizens of the country in which the data are collected. While pragmatic and operational, this classification is inappropriate for capturing student mobility because of differing national policies regarding the naturalisation of immigrants. Countries that have lower propensity to grant permanent residence to its immigrant populations are likely to report second generation immigrants as foreign students. Therefore, for student mobility and bilateral comparisons, interpretations of data based on the concept of foreign students should be made with caution. Students are classified as international students if they left their country of origin and moved to another country for the purpose of study. Depending on country-specific immigration legislation, mobility arrangements, and data availability, international students may be defined as students who are not permanent or usual residents of their country of study or alternatively as students who obtained their prior education in a different country, including another EU country.

Freshwater abstractions:   This dataset shows water abstractions by source (surface and ground water) and by major uses. Water abstractions refer to water taken from ground or surface water sources and conveyed to the place of use. If the water is returned to a surface water source, abstraction of the same water by the downstream user is counted again in compiling total abstractions.   When interpreting those data, it should be borne in mind that the definitions and estimation methods employed by member countries may vary considerably.   Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)  

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at:http://www.oecd.org/dataoecd/0/49/38356329.pdf. Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at: http://www.oecd.org/dataoecd/0/49/38356329.pdf.  Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

The Future of Business Survey is an original source of information on small and medium-sized enterprises (SMEs). Launched in February 2016, the survey is a partnership between Facebook, OECD, and the World Bank. It provides timely information on business owners’ assessment of the current state and future outlook of their business, job creation perspectives, main business challenges and participation in international trade. Several data breakdowns are available, in particular by size of the enterprise, age, sector, trading status and gender of owners or managers.

The GID-DB is a database providing researchers and policymakers with key data on gender-based discrimination in social institutions. This data helps analyse women’s empowerment and understand gender gaps in other key areas of development.Covering 180 countries and territories, the GID-DB contains comprehensive information on legal, cultural and traditional practices that discriminate against women and girls.

This part contains general information on number of insurance companies and employees within the sector.

This dataset presents data on waste by economic sector, using the major divisions of the International Standard Industrial Classification (ISIC), revision 4. Data source(s): OECD/Eurostat joint questionnaire on waste. Source for non-OECD countries: UNSD, Country Files from the UNSD/UNEP data collection on environment statistics (available at: https://unstats.un.org/unsd/envstats/country_files).

This table provides information on the main relevant indicators. The data have mainly been supplied by the World Bank, and cover, where available: -Current Gross National Income (GNI) in US $ millions; -GNI per capita (US $); -Population; -Energy use as kilogram of oil per capita; -Average Life Expectancy of Adults; and -Adult Literacy Rate as a percentage of the country population. Data for Sudan include South Sudan, with the exception of total population, which is reported separately.

Bilateral ODA commitments by purpose. Data cover the years 2005 to 2009. Amounts are expressed in USD million. The sectoral distribution of bilateral ODA commitments refers to the economic sector of destination (i.e. the specific area of the recipient's economic or social structure whose development is, or is intended to be fostered by the aid), rather than to the type of goods or services provided. These are aggregates of individual projects notified under the Creditor Reporting System, supplemented by reporting on the sectoral distribution of technical co-operation, and on actual disbursements of food and emergency aid.

This data set contains information of The insurance industry is a major component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays by covering personal and business risks. This annual report monitors global insurance market trends to support a better understanding of the insurance industry's overall performance and health.The OECD has collected and analysed data on insurance such as the number of insurance companies and employees, insurance premiums and investments by insurance companies dating back to the early 1980s. Over time, the framework of this exercise has expanded and now includes key balance sheet and income statement items for the direct insurance and reinsurance sector.

This data set combines the different regional publications of Revenue Statistics:Revenue Statistics 2019OECD/ATAF/AUC (2019), Revenue Statistics in Africa 2019OECD et al (2020), Revenue Statistics in Latin America and the Caribbean 2020 (LAC)Revenue Statistics in Asian and Pacific Economies 2019 Revenue Statistics The annual statistical publications present a unique set of detailed and internationally comparable tax revenue data in a common format. Its approach is based on the well-established methodology of the OECD Revenue Statistics (OECD, 2019), which has become an essential reference. It provides a conceptual framework defining which government receipts should be regarded as taxes and classifies different types of taxes. Comparable tables show revenue data by type of tax in national currency, as a percentage of GDP, and, for the different types of taxes, as a share of total taxation. Comparisons are also made with the averages of the 36 OECD economies, of the 24 LAC countries (two of which are OECD members countries° and of 26 African countries.   The data set does not replace the other publications, and users are advised to consult the regional data sets for country specific information.

Graduates are those who successfully complete an educational programme during the reference year of the data collection. One condition of a successful completion is that students should have enrolled in, and successfully completed, the final year of the corresponding educational programme, although not necessarily in the year of reference. Students who do not complete the final year of an educational programme, but later successfully complete a recognised "equivalency" examination based on knowledge learned outside of the education system, should not be counted as graduates. Successful completion is defined according to the graduation requirements established by each country: in some countries, completion occurs as a result of passing a final, curriculum-based examination or series of examinations. In other countries, completion occurs after a specific number of teaching hours has been accumulated (although completion of some or all of the course hours may also involve examinations).

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

This dataset presents trends in man-made emissions of major greenhouse gases and emissions by gas.   Data refer to total emissions of CO2 (emissions from energy use and industrial processes, e.g. cement production), CH4 (methane emissions from solid waste, livestock, mining of hard coal and lignite, rice paddies, agriculture and leaks from natural gas pipelines), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3). Data exclude indirect CO2.   Intensities (per unit of GDP and per capita) as well as index are calculated on gross direct emissions excluding emissions or removals from land-use, land-use change and forestry (LULUCF).   The GDP used to calculate intensities is expressed in USD at 2010 prices and PPPs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Gross claims payments in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. This part contains gross operating expenses in the reporting country, with a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Productivity is a key driver of economic growth and changes in living standards. Labour productivity growth implies a higher level of output for unit of labour input (hours worked or persons employed). This can be achieved if more capital is used in production or through improved overall efficiency with which labour and capital are used together, i.e., higher multifactor productivity growth (MFP). Productivity is also a key driver of international competitiveness, e.g. as measured by Unit Labour Costs (ULC).   The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, some time lag may arise which affects individual series and/or countries for two reasons: first, hours worked data from the OECD Employment Outlook are typically updated less frequently than the OECD Annual National Accounts Database; second, source data for capital services are typically available in annual national accounts later than source data for labour productivity and ULCs.   Note to users: The OECD Productivity Database accounts for the methodological changes in national accounts' statistics, such as the implementation of the System of National Accounts 2008 (2008 SNA) and the implementation of the international industrial classification ISIC Rev.4. These changes had an impact on output, labour and capital measurement. For Chile, China, Colombia, India, Japan, Turkey and the Russian Federation the indicators are in line with the System of National Accounts 1993 (1993 SNA); for all other countries, the indicators presented are based on the 2008 SNA

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.B1:B4

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

A System of Health Accounts 2011 provides an updated and systematic description of the financial flows related to the consumption of health care goods and services. As demands for information increase and more countries implement and institutionalise health accounts according to the system, the data produced are expected to be more comparable, more detailed and more policy relevant. It builds on the original OECD Manual, published in 2000 to create a single global framework for producing health expenditure accounts that can help track resource flows from sources to uses. It is the result of a collaborative effort between the OECD, WHO and the European Commission, and sets out in more detail the boundaries, the definitions and the concepts – responding to health care systems around the globe – from the simplest to the more complicated. The accounting framework is organised around a tri-axial system for the recording of health care expenditure, namely classifications of the functions of health care (ICHA-HC), health care provision (ICHA-HP), and financing schemes (ICHA-HF).

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

ICT goods are those that are either intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR which use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process. ICT goods are defined by the OECD in terms of the Harmonised System. The guiding principle for the delineation of ICT goods is that such goods must either be intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process.Another guiding principle was to use existing classification systems in order to take advantage of existing data sets and therefore ensure the immediate use of the proposed standard. In this case, the underlying system is the Harmonized System (HS). The HS is the only commodity classification system used on a sufficiently wide basis to support international data comparison. A large number of countries use it to classify export and import of goods, and many countries use it (or a classification derived from or linked to it) to categorise domestic outputs.The application of the ICT product definition to selection of in-scope HS categories is a somewhat subjective exercise. The fact that the HS is not built on the basis of the functionality of products makes it much more difficult. The distinction between products which fulfil those functions and products that simply embody electronics but fundamentally fulfil other functions is not always obvious.It is possible to adopt a narrow or broad interpretation of the guideline, though the OECD chose a broader interpretation, an approach which is consistent with that adopted to develop the ICT sector definition.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older with a tertiary education.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible. The exact national source and reference period for each file is given in Table A.1 (see the methodological document).

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The allocation of bilateral intermediate imports across using industries assumes that import coefficients are the same for all trade partners, i.e. SHAREipkt is identical across exporter countries. Hence, the bilateral pattern of imported intermediates from industry p is the same across all using industries k. However, it is different from the bilateral pattern of total imports from industry p because trade data (measured by VALUEijpt) allows distinguishing bilateral imports of intermediates from final good imports in industry p. While the BEC classification enables the identification of intermediate goods, no similar classification is available for trade in services, due to the high level of aggregation in services trade data. While goods trade data are based on customs declarations allowing the identification of goods at a highly disaggregated level, services trade data are based on a variety of information such as business accounts, administrative sources, surveys, and estimation techniques (Manual on Statistics of International Trade in Services, 2002). Hence, in the case of trade in services, VALUEijpt is the total value of imports of service p, i.e. both final and intermediate (and not only services that are used in the production of other goods and services, as in the case of goods data). By making an additional assumption and adjusting SHAREipkt, it is however possible to calculate trade in intermediate services. In the case of services imports, SHAREipkt is the share of imported service inputs p used by industry k in total imports of p of country i. In the case of services, besides the assumption that all trading partners have the same distribution of intermediate imports p across using industries k, it is furthermore required that the share of intermediate services in overall bilateral services imports of country i is the same across all partner countries j. Finally, it should be mentioned that trade data reported in the trade statistics do not fully match imports as reported in I-O tables. One main reason is that while trade data is recorded at consumer prices, I-O tables are evaluated at producer prices. There are also other differences such as the treatment of re-exports, scrap metal, waste products and second hand goods or unallocated trade data.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

Data source(s) used The inland fisheries data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.   Data are collected in tonnes and national currency at current values. For analytical purposes and data comparisons, value data are converted and published also in US dollars. Exchange rates are average yearly spot rates, taken from the dataset OECD Economic Outlook: Statistics and Projections. Data reported in this dataset are expressed in tonnes, in units of national currency and in US dollars. Data are recorded on a landed weight basis, i.e. the mass (or weight) of a product at the time of landing, regardless of the state in which is landed (i.e. whole, gutted, filleted, meal, etc.). For exceptions, please see the individual notes. Statistical population The statistical population is the set of countries participating in the work of the COFI, i.e. OECD members, excluding landlocked countries, with some exceptions (Czech Republic and Slovakia are included, Israel is not). The group includes also the following partner countries: Argentina, China, Colombia, Costa Rica, Indonesia, Lithuania, Peru, Philippines, Thailand and Chinese Taipei. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates. Key statistical concept Inland fisheries include catches of fish, crustaceans, molluscs and other aquatic invertebrates (and animals), residues and seaweeds in lakes, rivers, ponds, inland canals and other land-locked water bodies. For the purpose of this questionnaire the boundary between inland and marine areas at the river mouth is left to the discretion of the national authority. Production from aquaculture installations should not be reported on this form. However, catches from fisheries that are managed by stocking should be included. The methodological reference document for fisheries and aquaculture statistics is the CWP Handbook of Fishery Statistics.

These data are part of a larger database, hosted on a different website, which includes both quantitative and qualitative data, as well as graphs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Breakdown of net premiums written in the reporting country in terms of domestic risks and foreign risks, thus providing an indicator of direct cross-border operations of insurance business.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Covers business written abroad by branches, agencies and subsidiaries established abroad of domestic undertakings and includes all business written outside the country by these entities (in both OECD and non-OECD countries).

This data deals with premiums written by classes of non-life insurance for the business written in the reporting country.

Geographic coverage OECD countries, Selected African and Asian countries, Selected Latin American countries Institutional coverage The insurance industry is a key component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays in covering personal and business risks. The "OECD Insurance Statistics" publication provides major official insurance statistics for all OECD countries. The reader will find information on the diverse activities of this industry and on international insurance market trends. The data, which are standardised as far as possible, are broken down under numerous sub-headings, and a series of indicators makes the characteristics of the national markets more readily comprehensible. This publication is an essential tool for civil servants, businessmen and academics working in the insurance field. Item coverage This part consists of tables by indicators, which reflect the most significant characteristics of the OECD insurance market. In most cases, the tables contain data of all OECD countries as well as aggregated "OECD", "EU15" (the 15 member countries of the European Union in 1995) and "NAFTA" data from 1983 to 2015, for the following categories: - life insurance, - non-life insurance - and total. The premiums amounts are converted from national currencies into US dollar. Exchange rates used are end-of-period exchanges rates for all variables valued at the end of the year, and period-average for variables representig a flow during the year.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. Among the few available indicators of technology output, patent indicators are probably the most frequently used. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are : patents have a close link to invention; patents cover a broad range of technologies on which there are sometimes few other sources of data; the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); and patent data are readily available from patent offices. However, patents are subject to certain drawbacks: the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value; many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.; the propensity to patent differs across countries and industries; differences in patent regulations make it difficult to compare counts across countries; and changes in patent law over the years make it difficult to analyse trends over time.

This dataset contains the number of people who graduated from an education programme by country of origin and sex.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

This indicator reports the percentage of students of each country of origin over the total of international students.

This dataset presents official international trade statistics in fisheries products, directly sourced from the UN Comtrade Database.

This table contains figures on affiliates under foreign control by investing country in the total manufacturing, total services and total business enterprise sectors.

The IPP.Stat is the statistics portal of the Innovation Policy Platform containing the main available indicators relevant to a country’s innovation performance. In addition to the traditional indicators used to monitor innovation, the range of the coverage to be found in the IPP.Stat calls for the inclusion of indicators from other domains that describe the broader national and international context in which innovation occurs. Indicators are sourced primarily from the OECD and the World Bank, as well as from other sources of comparable quality. The statistics portal is still under development.

Land resources are one of the four components of the natural environment: water, air, land and living resources. In this context land is both: a physical "milieu" necessary for the development of natural vegetation as well as cultivated vegetation;a resource for human activities.  The data presented here give information concerning land use state and changes (e.g. agricultural land, forest land).  Land area excludes area under inland water bodies (i.e. major rivers and lakes).   Arable refers to all land generally under rotation, whether for temporary crops (double-cropped areas are counted only once) or meadows, or left fallow (less than five years). These data are not meant to indicate the amount of land that is potentially cultivable.  Permanent crops are those that occupy land for a long period and do not have to be planted for several years after each harvest (e.g. cocoa, coffee, rubber). Land under vines and trees and shrubs producing fruits, nuts and flowers, such as roses and jasmine, is so classified, as are nurseries (except those for forest trees, which should be classified under "forests and other wooded land").  Arable and permanent crop land is defined as the sum of arable area and land under permanent crops.  Permanent meadows and pastures refer to land used for five years or more to grow herbaceous forage crops, either cultivated or growing wild (wild prairie or grazing land).  Forest refers to land spanning more than 0.5 hectare (0.005 km2) and a canopy cover of more than 10 percent, or trees able to reach these thresholds in situ. This includes land from which forests have been cleared but that will be reforested in the foreseeable future. This excludes woodland or forest predominantly under agricultural or urban land use and used only for recreation purposes.

The productivity and income estimates presented in this dataset are mainly based on GDP, population and employment data from the OECD Annual National Accounts. Hours worked are sourced from the OECD Annual National Accounts, the OECD Employment Outlook and national sources. The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, timely data issues may arise and affect individual series and/or individual countries. In particular, annual hours worked estimates from the OECD Employment Outlook are typically updated less frequently (once a year, in the summer) than series of hours worked from the OECD Annual National Accounts.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.

These data refer to material resources, i.e. materials originating from natural resources that form the material basis of the economy: metals (ferrous, non-ferrous) non-metallic minerals (construction minerals, industrial minerals), biomass (wood, food) and fossil energy carriers. 

This dataset presents members' total use of the multilateral system i.e. both their multilateral aid ("Core contributions to") and bilateral aid channelled through ("Contributions through") multilateral organisations. These data originate from members' reporting at item-level in the CRS and are published here starting with 2011 data (item-level data for multilateral aid is not complete in CRS for earlier years).

Despite the growing importance of international trade, driven in large part by the rise of globalisation and the accompanying international fragmentation of production, the availability of statistics on price change in international merchandise trade at more graular level is still limited. To fill this data gap, the OECD has developed this new Merchandise Trade Price Index (MTPI) database using UN COMTRADE. The first release covers about 100 countries from 2011 to 2017. Indices by reporting country are available for both exports and imports, broken down by 30 products, aligned with the 2-digit level of the Classification of Products of Activity (CPA, version 2.1). Future releases are planned to expand the country coverage and the level of disaggregation.

The aim of the OECD's new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) and ground-level ozone (O3) have potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. Exposure to ground-level ozone (O3) has serious consequences for human health, contributing to, or triggering, respiratory diseases. These include breathing problems, asthma and reduced lung function (WHO, 2016; Brauer et al., 2016). Ozone exposure is highest in emission-dense countries with warm and sunny summers. The most important determinants are background atmospheric chemistry, climate, anthropogenic and biogenic emissions of ozone precursors such as volatile organic compounds, and the ratios between different emitted chemicals.

This dataset presents trends in amounts of municipal waste generated (including household waste), and the treatment and disposal method used. The amount of waste generated in each country is related to the rate of urbanisation, the types and pattern of consumption, household revenue and lifestyles.

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated..

It presents the different transactions and balances to get from the GDP to the net lending/net borrowing. Therefore, it includes, in particular, national disposable income (gross and net), consumption of fixed capital as well as net saving.

It presents the final consumption expenditure of households broken down by the COICOP (Classification of Individual Consumption According to Purpose) classification and by durability.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector in the SNA 1993 conceptual framework. In addition, it brings to light two relevant aggregates that do not belong to this conceptual frame work: the Total Revenue and the Total Expenditure of the general government sector. Unit of measure used - National currency; current prices. Expressed in millions.

It provides a breakdown of government expenditure according to their function. To meet this end, economic flows of expenditure must be aggregated according to the Classification of the Functions of Government (COFOG).

It presents the three approaches of the GDP: expenditure based, output based and income based. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

It presents population data and employment by main activity. It includes national concept data for economically active population, unemployed persons, total employment, employees and self-employed, as well as domestic concept data for total employment, employees and self-employed. The domestic concept data are available broken down by main activity. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector Data are also available, for most countries, for the sub-sectors of general government.

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries according to the classification ISIC rev.4. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Note: 6A. Value added and its components by activity, ISIC rev4

Non-medical determinants of health: Unhealthy lifestyles and poor environments cause millions of people to die prematurely. Smoking, harmful alcohol use, physical inactivity and obesity are the root cause of many chronic conditions. This dataset presents the latest data for tobacco consumption (including daily smokers by age and sex), vaping (by age and sex), alcohol consumption, fruits and vegetables consumption, as well as measured and self-reported data on overweight and obesity.

This OECD inventory maps existing cross-country surveys that provide information on the characteristics of people's jobs. The information included in this inventory covers international surveys conducted since the early 1990s that are based on individuals' self-reported assessment of their current job, for 160 countries over 25 years. Survey questions are grouped into 19 indicators. For each indicator, binary codes (1 and 0) show whether indicators are available or not for the various countries and years. The inventory also provides users with detailed documentation on the questions used in the various surveys for measuring these indicators.

The OECD Science, Technology and Industry Outlook reviews key trends in STI policies and performance in OECD countries and major emerging economies. It is published every two years and draws on a unique international policy survey conducted by the OECD - with more than 45 countries involved in 2014 - and the latest OECD work on STI policy analysis and measurement. Following an overview of the recent STI global landscape, key current policy issues are discussed across a series of thematic policy profiles. Country profiles report the STI performance of individual countries and the most recent national policy developments.

The Agricultural Outlook has been prepared as a joint report by the Organisation for Economic Co-operation and Development (OECD) and the Food and Agriculture Organization (FAO) of the United Nations. The report provides a ten year forward looking, assessment of trends and prospects in the major temperate-zone agricultural commodity markets of biofuels, cereals, oilseeds and oilseed products, sugar, meat, fish and sea food, dairy products, cotton, roots and tubers and pulses. It is published annually, in the middle of the second quarter, as part of a continuing effort to promote informed discussion of emerging market and policy issues. The data used to develop the projections underlying the assessment are those available as of January 2023. The projections and assessments provided in the report are the result of close co-operation between the OECD and FAO Secretariats and national experts with a jointly developed modelling system, based on the AGLINK-COSIMO model, used to facilitate consistency in the projections. The data series for the projections are drawn from OECD and FAO databases. For the most part information in these databases has been taken from national statistical sources. For further details on particular series, enquiries should be directed to the OECD and FAO Secretariats.

Other official flows are official sector transactions which do not meet the ODA criteria, e.g.:  i.) Grants to developing countries for representational or essentially commercial purposes;  ii.) Official bilateral transactions intended to promote development but having a grant element of less than 25 per cent;  iii.) Official bilateral transactions, whatever their grant element, that are primarily export-facilitating in purpose. This category includes by definition export credits extended directly to an aid recipient by an official agency or institution ("official direct export credits");  iv.) The net acquisition by governments and central monetary institutions of securities issued by multilateral development banks at market terms;  v.) Subsidies (grants) to the private sector to soften its credits to developing countries [see Annex 3, paragraph A3.5.iv)b)];  vi.) Funds in support of private investment.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are :patents have a close link to invention;patents cover a broad range of technologies on which there are sometimes few other sources of data;the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); andpatent data are readily available from patent offices. However, patents are subject to certain drawbacks:the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value;many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.;the propensity to patent differs across countries and industries;differences in patent regulations make it difficult to compare counts across countries; andchanges in patent law over the years make it difficult to analyse trends over time. 

Private transactions are those undertaken by firms and individuals resident in the reporting country.

This dataset presents activities in support of development from philanthropic foundations since 2009, including bilateral activities and core contributions to multilateral organisations. Bilateral activities from this dataset can also be found in the Creditor Reporting System (CRS) database. Collecting data on private philanthropy for development is work in progress, which may explain break in series for some foundations.

The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the OECD Annual National Accounts database. However, timely data issues may arise and affect individual series and/or individual countries. Sectors differ from each other with respect to their productivity growth. Understanding the drivers of productivity growth at the total economy level requires an understanding of the contribution of each sector. Data of real gross value added, labour compensation, hours worked and employment are sourced from the OECD Annual National Accounts.

The Regional database contains annual data from 1995 to the most recent available year (generally 2022 for demographic and labor market data, 2021 for regional accounts, innovation and social statistics). 

The Regional database contains annual data from 1995 to the most recent available year (generally 2018 for demographic and labor market data, 2017 for regional accounts, innovation and social statistics). The data collection is undertaken by the Center for Entrepreneurship, SMEs, Regions and Cities (CFE). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and via downloads from the web-sites of National Statistical Offices and Eurostat

The Regional Database contains annual data from 1995 to the most recent available year (generally 2016 for demographic, 2015 for labor market data and 2014 for regional accounts, innovation and social statistics).

The Regional Database contains annual data from 1995 to the most recent available year (generally 2014 for demographic and labour market data, 2013 for regional accounts, innovation and social statistics).   In any analytical study conducted at sub-national levels, the choice of the territorial unit is of prime importance. The territorial grids (TL2 and TL3) used in this database are officially established and relatively stable in all member countries, and are used by many as a framework for implementing regional policies. This classification - which, for European countries, is largely consistent with the Eurostat classification - facilitates greater comparability of regions at the same territorial level. The differences with the Eurostat NUTS classification concern Belgium, Greece and the Netherlands where the NUTS 2 level correspond to the OECD TL3 and Germany where the NUTS1 corresponds to the OECD TL2 and the OECD TL3 corresponds to 97 spatial planning regions (Groups of Kreise). For the United Kingdom the Eurostat NUTS1 corresponds to the OECD TL2. Due to limited data availability, labour market indicators in Canada are presented for a different grid (groups of TL3 regions). Since these breakdowns are not part of the OECD official territorial grids, for the sake of simplicity they are labelled as Non Official Grids (NOG).

Revenue Statistics in LAC Countries is a joint publication by the OECD Centre for Tax Policy and Administration, the OECD Development Centre, the Economic Commission for Latin America and the Caribbean (ECLAC) , the Inter-American Center for Tax Administrations (CIAT) and the Interamerican Development Bank (IDB). It presents detailed, internationally comparable data on tax revenues for 24 Latin American and Caribbean economies, two of which (Chile and Mexico) are OECD members. Its approach is based on the well-established methodology of the OECD Revenue Statistics (OECD, 2016), which has become an essential reference source for OECD member countries. Comparisons are also made with the average for OECD economies. Comparable tables show total tax revenue data and by tax as a percentage of GDP, and, for the different types of taxes, as a share of total taxation. Detailed country tables show information in national currency values

Reference Series - Latin American Countries Source: OECD National Accounts data for Chile and Mexico and official National Accounts data for the other countries

A key set of information for policy analysis is i) how much revenue is collected; ii) in what ways is it collected; iii) from which institutional units of the economy are revenues raised for each particular financing scheme; and iv) which financing schemes receive those revenues. This dataset provides information about the contribution mechanisms the particular financing schemes use to raise their revenues. Understanding the nature of the flows is of importance from the perspective of both health and public finance policy. For example, the classification of revenues make it possible to distinguish between public and private funding of health care finance. Understanding how resources are raised by financing schemes is important for many countries, as many health systems are struggling with the issue of funding. The classification of revenues of financing schemes is suitable for tracking the collection mechanisms of a financing framework. Furthermore, the new classification makes it possible to analyse the contribution of the institutional units to health financing.

Trade in services drives the exchange of ideas, know-how and technology. It helps firms cut costs, increase productivity, participate in global value chains and boost competitiveness. Consumers benefit from lower prices and greater choice. However, international trade in services is often impeded by trade and investment barriers and domestic regulations. The Service Trade Restrictions Index (STRI) helps identify which policy measures restrict trade. It provides policy makers and negotiators with information and measurement tools to open up international trade in services and negotiate international trade agreements. It can also help governments identify best practice and then focus their domestic reform efforts on priority sectors and measures. The STRI indices take the value from 0 to 1, where 0 is completely open and 1 is completely closed. They are calculated on the basis of information in the STRI database which reports regulation currently in force.

The aim of the OECD’s new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The aim of the OECD's new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The aim of the OECD’s new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The SIGI is built on 27 innovative variables measuring discriminatory social institutions, which are grouped into 4 dimensions: discrimination in the family, restricted physical integrity, restricted access to productive and financial resources, and restricted civil liberties.Lower values indicate lower levels of discrimination in social institutions: the SIGI ranges from 0% for no discrimination to 100% for very high discrimination.

Excess capacity is one of the main challenges facing the global steel sector. The OECD Steelmaking Capacity database contains data on crude steelmaking capacity by economy and provides researchers and policymakers with an important tool for analysing steel capacity developments.

The OECD STRI heterogeneity indices complement the existing STRI's and presents indices of regulatory heterogeneity based on the rich information in the STRI regulatory database. The indices are built from assessing – for each country pair and each measure – whether or not the countries have the same regulation. For each country pair and each sector, the indices reflect the (weighted) share of measures for which the two countries have different regulation.

The OECD indicators of employment protection are synthetic indicators of the strictness of regulation on dismissals and the use of temporary contracts. For each year, indicators refer to regulation in force on the 1st of January. Version 1 of the indicator of strictness of employment protection - individual and collective dismissals (regular contracts) - does not incorporate all the data items of version 3 and, in particular, does not incorporate regulation of collective dismissals. You should only use version 1 if you need data for years for which neither version 2 nor 3 are available.

The OECD indicators of employment protection are synthetic indicators of the strictness of regulation on dismissals and the use of temporary contracts. For each year, indicators refer to regulation in force on the 1st of January. For more information and full methodology, see www.oecd.org/employment/protection.

The OECD indicators of employment protection are synthetic indicators of the strictness of regulation on dismissals and the use of temporary contracts. For each year, indicators refer to regulation in force on the 1st of January. For more information and full methodology, see www.oecd.org/employment/protection.

The OECD indicators of employment protection legislation evaluate the regulations on the dismissal of workers on regular contracts and the hiring of workers on temporary contracts. They cover both individual and collective dismissals.The indicators have been compiled using the Secretariat’s own reading of statutory laws, collective bargaining agreements and case law as well as contributions from officials from OECD member countries and advice from country experts

For data aligned to Finance, the year shown is the calendar year. For data aligned to personnel, the year shown is the year in which the end of the school year falls (e.g. 2002 refers to the school year 2001/2002), with the exceptions of Korea where the year refers to the year in which the school year begins and Australia and New Zealand where the school academic year corresponds to the calendar year.

Data cited at: OECD (2020), Suicide rates (indicator). doi: 10.1787/a82f3459-en (Accessed on 18 August 2020) Suicide rates are defined as the deaths deliberately initiated and performed by a person in the full knowledge or expectation of its fatal outcome. Comparability of data between countries is affected by a number of reporting criteria, including how a person's intention of killing themselves is ascertained, who is responsible for completing the death certificate, whether a forensic investigation is carried out, and the provisions for confidentiality of the cause of death. Caution is required therefore in interpreting variations across countries. The rates have been directly age-standardised to the 2010 OECD population to remove variations arising from differences in age structures across countries and over time. The original source of the data is the WHO Mortality Database. This indicator is presented as a total and per gender and is measured in terms of deaths per 100 000 inhabitants (total), per 100 000 men and per 100 000 women.

Survey on Monitoring the Paris Declaration. The dataset contains data as reported by donors and national co-ordinators in participating partner countries. The dataset includes all quantitative data collected through the 2006, 2008 and 2011 Surveys.

The OECD Sustainable Ocean Economy Database synthesizes available ocean-related datasets and indicators from across the Organisation to improve their discoverability and comparability. The database brings together relevant indicators from the Environment Directorate (ENV), the Trade and Agriculture Directorate (TAD), the Centre for Entrepreneurship, SMEs, Regions and Cities (CFE), the International Transport Forum (ITF), the International Energy Agency (IEA), and others.

This indicator reports the import-weighted applied tariffs on environmentally related goods as defined in the Combined List of Environmental Goods (CLEG) in percentage points for all countries between 2003 and 2016.

This dataset presents the latest data on the state of threatened species, by species type.    When interpreting these data, it should be borne in mind that the number of species known does not always accurately reflect the number of species in existence and that varying definitions can limit comparability across countries.   Data source(s): OECD Annual Quality Assurance (AQA) questionnaire.

Because of the limited availability of official statistics on national supply-use and input-output tables in recent years – reflecting the fact that these are only typically available at best two or three years after the reference period to which they refer – TiVA indicators for the most recent years, as displayed in this dataset, are estimated using now-casting techniques. The approach (described in more detail in the accompanying methodological note) in essence estimates national input-output tables by projecting relationships observed in the latest TiVA benchmark year (currently 2011) into nowcast years (currently 2012-2014) but constrained to official estimates of gross output and value-added by industry and national accounts main aggregates of demand and trade, and supplemented by bilateral trade statistics, all of which are available throughout the nowcast period. Importantly, the projections of relationships in 2011 into 2012 are determined using a volume approach, to account for possible distortions that might be introduced – by for example differential price movements in imports and domestic production – if projections were made using nominal relationships. These estimates are then reflated into current prices, and simultaneously balanced – consistent with official volume and current price estimates of trade, demand and activity – to arrive at a balanced national input-output table in 2012, in nominal terms as well as in prices of 2011. Estimates for 2013 and 2014 are calculated in the same manner but using, respectively, the 2012 and 2013 relationships as the starting point.

Official Development Financing (ODF), measured for recipient countries only, is defined as the sum of their receipts of bilateral ODA, concessional and non-concessional resources from multilateral sources, and bilateral other official flows made available for reasons unrelated to trade, in particular loans to refinance debt.

Total Official Flows: the sum of Official Development Assistance (ODA) and Other Official Flows (OOF) represents the total (gross or net) disbursements by the official sector at large to the recipient country shown.

Total Receipts, Net: in addition to Official Development Assistance, this heading includes in particular: other official bilateral transactions which are not concessional or which, even though they have concessional elements, are primarily trade facilitating in character (i.e., "Other Official Flows''); changes in bilateral long-term assets of the private non-monetary and monetary sectors, in particular guaranteed export credits, private direct investment, portfolio investment and, to the extent they are not covered in the preceding headings, loans by private banks. Flows from the multilateral sector which are not classified as concessional are also included here.

The Trade in eMployment (TiM) database is a collection of labour market indicators designed to provide additional insights into global production networks and supply chains and complement Trade in Value Added (TiVA) indicators (http://oe.cd/tiva). Estimates of employment or compensation of employees embodied in foreign final demand (or in gross exports) can reveal the extent to which a country's workforce depends on its integration into the global economy. The TiM database includes indicators based on employment and compensation of employees for 51 and 64 economies respectively (including all European Union, OECD and G20 member countries and most East and Southeast Asian economies), as well as region aggregates, for the years 2005-2015. Indicators are available for 36 industries within a hierarchy based on ISIC Rev.4. The indicators are calculated using the 2018 edition of OECD's Inter-Country Input-Output (ICIO) tables (see http://oe.cd/icio) together with recent estimates of employment and compensation of employees by industrial activity from official sources.

This indicator reports the amount of exports and imports of environmentally-related goods as defined in the Combined List of Environmental Goods (CLEG) in current USD for all countries between 2003 and 2016.

The TiVA database contains a range of indicators measuring the value added content of international trade flows and final demand. The indicators are derived from the 2016 version of OECD's Inter-Country Input-Output (ICIO) Database.  The ICIO has been constructed from various national and international data sources all drawn together and balanced under constraints based on official (SNA93) National Accounts by economic activity and National Accounts main aggregates.  Underlying sources used are notably:  • National supply and use tables (SUTs)  • National and harmonised Input-Output Tables • Bilateral trade in goods by industry and end-use category (BTDIxE) and  • Bilateral trade in services.  Compared to the old versions of the TiVA database, this current version includes two more countries, Morocco and Peru. The data are presented for all years from 1995 to 2011. The industry breakdown remains the same. 

The Trade in Value Added (TiVA) database consists of a set of measures that aim to provide better insights into global production networks and supply chains than is possible with conventional trade statistics.   The Origin of value added in final demand presented here, is derived from the latest version of OECD’s Inter-Country Input-Output (ICIO) database and provides estimates of final demand in country c for industry i final goods and services, broken down by the value added originating from source industry j in source country s.   In other words, it reveals how the value of final demand goods and services consumed within a country is an accumulation of value generated by many industries in many countries.   For a description of the method used for calculating these estimates using the ICIO   Domestic value added origin is shown where source country s = c and, for convenience, also represented by source country = “DXD: Domestic”.   From this data cube, a range of final demand-based measures can be derived including those in TiVA principal indicators cube such as: • Domestic value added embodied in foreign final demand, FFD_DVA and related partner shares FFD_DVApSH. • Foreign value added embodied in domestic final demand, DFD_FVA and related partner shares DFD_FVApSH.

The Trade-in Value Added (TiVA) database consists of a set of measures that aim to provide better insights into global production networks and supply chains than is possible with conventional trade statistics.   The Origin of value-added in gross imports presented here is derived from the latest version of OECD’s Inter-Country Input-Output (ICIO) database. It provides estimates of gross imports by country c of goods and services from industry in partner country/region p broken down by value-added originating from source country/region s.   In other words, the four dimensions link the imports of country c to the value-added from source country s embodied in the exports of industry in the exporting country p - thus revealing how the value of a country’s gross imports of intermediate and final products from a particular partner is an accumulation of value generated by many countries.   For a description of the method used for calculating these estimates, using the ICIO   From this data cube, a range of gross imports-based measures can be derived including the following found in the main TiVA indicators database: • Total gross imports by industry, IMGR (c, i): set exporting country p = World and source country s = World. • Domestic value-added content of gross imports by partner and industry, IMGR_DVA (c, i, p): set source country s = importing country c. • Share of IMGR_DVA in relation to IMGR: IMGR_DVAsh (c, i, p).   Note that the same value-added originating from source country s can be present in the gross imports of more than one importing country c (as embodied value-added, from upstream production, may cross national borders many times). In general, therefore, these estimates should be viewed from the perspective of an importing country c.

The indicator reports the amount of exports and imports of waste and scrap as defined in Kellenberg (2012) in current USD and in kilograms for all countries between 2003 and 2016.

Uranium is the raw material used to produce fuel for long-lived nuclear power facilities, necessary for the generation of significant amounts of baseload low-carbon electricity for decades to come. Although a valuable commodity, declining market prices for uranium in recent years, driven by uncertainties concerning the evolution in the use of nuclear power, have led to significant production cutbacks and the postponement of mine development plans in a number of countries and to some questions being raised about future uranium supply.

This dataset presents national-level data on water made available for use, by sector. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)

World Indicators of Skills for Employment (WISE) provide a comprehensive system of information relating to skills development. WISE presents countries with data upon which they can design skills policies and programs and monitor their impact on key outcomes, including responsiveness to current and emerging patterns of labour market demand, employability, productivity, health status, gender equity and lifelong learning.The database covers the period from 1990 to the present and consists of five inter-related domains of indicators:Contextual factors drive both the supply of and demand for skills.Skill acquisition covers investments in skills, the stock of human capital and its distribution.Skill requirements measure the demand for skills arising in the labour market.The degree of matching captures how well skills obtained through education and training correspond to the skills required in the labour market.Outcomes reflect the impact of skills on economic performance and employment and social outcomes.