Organisation for Economic Co-operation and Development

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilisers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilizers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

This database includes annual, quarterly and monthly information on carbon dioxide (CO2) emissions related to commercial passenger, freight, and general aviation flights, on both a territory and a residence basis, for 186 countries. These CO2 emissions are estimated by the OECD, based on a consistent methodology across countries. The main source used for the estimation of these CO2 emissions is a database compiled by the International Civil Aviation Organisation (ICAO) with all commercial passenger and freight flights around the world.

AITRAW = All in average income tax rates at average wage OECD Taxing Wages. Taxing Wages provides unique information on income tax paid by workers and social security contributions levied on employees and their employers in OECD countries. In addition, this annual publication specifies family benefits paid as cash transfers. Amounts of taxes and benefits are detailed program by program, for eight household types which differ by income level and household composition. Results reported include the marginal and effective tax burden for one- and two-earner families, and total labour costs of employers.

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers that measure the prices of residential properties over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. They can help, for example, to monitor potential macroeconomic imbalances and the risk exposure of the household and financial sectors. This dataset covers the 34 OECD member countries and some non-member countries. In addition to the nominal RPPIs it contains information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. This dataset contains quarterly statistics for each country. House prices differ widely across OECD countries, both with respect to recent changes and to valuation levels. The OECD has identified one main nominal index for each country that covers the prices for the sale of newly-built and existing dwellings. The datasets “Analytical house price indicators” and “Residential Property Price Indices (RPPIs) – Headline Indicators” refer to the same price indices for all countries apart from Brazil, Canada, China, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “Residential Property Price Indices (RPPIs) – Complete database”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap. This research dataset provides extended time series coverage for many countries. The objective is to provide information on the long term trend of house prices and develop indicators which can be used to help track and analyse macroeconomic developments and risks. The extended data supplement the OECD RPPI data with historical data from a variety of sources, including other international organisations, central banks and national statistical offices. The methodological basis on the historical data and the types of geographical areas and dwellings they cover can differ from those used in the OECD RPPI data. The database contains a number of additional series. Real house prices are given by the ratio of seasonally adjusted nominal house prices to the seasonally adjusted consumers’ expenditure deflator in each country, from the OECD national accounts database. This provides information on how nominal house prices have changed over time relative to prices in the general economy. The rental prices come from the OECD Main Economic Indicators database and refer to Consumer Price Indices (CPIs) for Actual rentals for housing (COICOP 04.1). If this indicator is missing for a country, another indicator is chosen. The chosen indicator are usually those corresponding to the CPI aggregate for Housing including Actual rentals for housing (COICOP 04.1), imputed rentals for housing (COICOP 04.2) and Maintenance and repair of the dwelling (COICOP 04.3). The disposable income indicators come from the OECD national accounts database. Net household disposable income is used. The population data come from the OECD national accounts database. The price-to-rent ratio is given by the ratio of nominal house prices to rental prices. This is a measure of the profitability of owning a house. The price-to-income ratio is given by the ratio of nominal house prices to nominal household disposable income per capita. This is a measure of the affordability of purchasing a house. An indication that house prices may be overvalued is provided if either of these ratios is above their long-term averages. The standardised price-rent and price-income ratios show the current price-rent and price-income ratios relative to their respective long-term averages. The long-term average, which is used as a reference value, is calculated over the whole period available when the indicator begins after 1980 or 1980 if the indicator is available over a longer time period. The standardised ratio is indexed to a reference value equal to 100 over the full sample period. Values over 100 indicate that the present price-rent ratio, or price-income ratio, is above its long-run norms. This provides an indication of possible housing market pressures.

The OECD's ANalytical Business Enterprise Research and Development (ANBERD) database presents annual data on Research and Development (R&D) expenditures by industry and was developed to provide analysts with comprehensive data on business R&D expenditures. The ANBERD database incorporates a number of estimations that build upon and extend national submissions of business enterprise R&D data by industry (main activity/industry orientation). The current version of the ANBERD database presents OECD countries' and selected non-member economies' business expenditure on R&D since 1987, broken down across 100 manufacturing and service industry groups. The reported data follow the International Standard Industrial Classification, Revision 4 (ISIC Rev. 4) and are expressed in national currencies as well as in US dollars at Purchasing Power Parity (PPP), both at current and constant prices.   Main activity and industry orientation: The 2015 Frascati Manual practice is to report BERD on an enterprise basis. The main economic activity of an enterprise is usually defined as that which accounts for most of its economic outputs; this may be identified directly from sales or indirectly proxied (such as by numbers of personnel devoted to different activities). This determines the industry in which the enterprise, and any BERD it carries out, is classified. As such, all BERD of a diversified enterprise (i.e. one with multiple lines of business) is allocated to the same industry, that of its main activity. This enables, as far as possible, the alignment and compatability of BERD data with other economic statistics (e.g. value added broken down by industry). In addition, the Frascati Manual also recommends reporting BERD by industry orientation, whereby the statistical unit’s R&D is distributed across the various lines of business to which it relates. In a few countries, hybrid approaches are followed and reported as main activity data. As an example, some countries primarily follow the main activity approach but redistribute the R&D of large diversified firms across the economic activities to which it relates. This can affect interpretation of the data and resulting statistics. There are also important differences between countries in the treatment of R&D undertaken by firms in the service sector but closely associated (though not necessarily contractually) with manufacturing firms. Industrial research institutes, largely funded by the manufacturing industries they serve, are the most frequent examples. With the implementation of the 2015 Frascati Manual, such hybrid data will be phased out in favour of a strict main activity approach. Countries still reporting hybrid data are flagged in the ANBERD country notes.

The “ALFS Summary tables” dataset is a subset of the Annual Labour Force Statistics database which presents annual labour force statistics and broad population series for 34 OECD member countries plus Brazil, Columbia and Russian Federation and 4 geographical areas (Major Seven, Euro area, European Union and OECD-Total). Data are presented in thousands of persons, in percentage or as indices with base year 2010=100. This dataset contains estimates from the OECD Secretariat for the latest years when countries did not provide data. These estimates are necessary to compile aggregated statistics for the geographical areas for a complete span of time. Since 2003, employment data by sector for the United States are compiled following the North American Industrial Classification System (NAICS); therefore they are not strictly comparable with other countries’ data. Euro area and European Union data were extracted from Eurostat (LFS Series, Detailed annual survey results in New Cronos). Euro area refer to Euro area with 17 countries (geo = ea17). European Union refers to European Union with 27 countries (geo = eu27).

Data source used: The aquaculture production data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.

The concept used is the total number of hours worked over the year divided by the average number of people in employment. The data are intended for comparisons of trends over time; they are unsuitable for comparisons of the level of average annual hours of work for a given year, because of differences in their sources. Part-time workers are covered as well as full-time workers. The series on annual hours actually worked per person in total employment presented in this table for all 34 OECD countries are consistent with the series retained for the calculation of productivity measures in the OECD Productivity database (www.oecd.org/statistics/productivity/compendium). However, there may be some differences for some countries given that the main purpose of the latter database is to report data series on labour input (i.e. total hours worked) and also because the updating of databases occur at different moments of the year. Hours Hours actually worked per person in employment are according to National Accounts concepts for 18 countries: Austria, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Korea, the Netherlands, Norway, the Slovak Republic, Spain, Sweden, Switzerland and Turkey. OECD estimates for Belgium, Ireland, Luxembourg and Portugal for annual hours worked are based on the European Labour Force Survey, as are estimates for dependent employment only for Austria, Estonia, Greece, the Slovak Republic and Slovenia. The table includes labour-force-survey-based estimates for the Russian Federation.countries: For further details and country specfic notes see: www.oecd.org/employment/outlook and www.oecd.org/employment/emp/ANNUAL-HOURS-WORKED.pdf

This dataset presents the average number of students in a class by type of institution.

The average effective age of retirement is calculated as a weighted average of (net) withdrawals from the labour market at different ages over a 5-year period for workers initially aged 40 and over. In order to abstract from compositional effects in the age structure of the population, labour force withdrawals are estimated based on changes in labour force participation rates rather than labour force levels. These changes are calculated for each (synthetic) cohort divided into 5-year age groups. The estimates shown in red are less reliable as they have been derived from interpolations of census data rather than from annual labour force surveys. The estimates for women in Turkey are based on 3-yearly moving averages of participation rates for each 5-year age group. OECD estimates based on the results of national labour force surveys, the European Union Labour Force Survey and, for earlier years in some countries, national censuses.

The balance of payments is a statistical statement that provides a systematic summary of economic transactions of an economy with the rest of the world, for a specific time period. The transactions are for the most part between residents and non-residents of the economy. A transaction is defined as an economic flow that reflects the creation, transformation, exchange, transfer, or extinction of economic value and involves changes in ownership, of goods or assets, the provision of services, labour or capital.  This dataset presents countries compiling balance of payments statistics in accordance with the 6th edition of the Balance of Payments and International Investment Position Manual published by the IMF (BPM6). Transactions include: the goods and services accounts, the primary income account (income account in BPM5), the secondary income account (transfers in BPM5), the capital account, and the financial account. Changes in BPM6 compared to BPM5 are often a consequence of a stricter application of the change of ownership principle in particular in the goods and services accounts. They relate to transactions on goods and services (merchanting, goods for processing, Insurance), income (investment income), and financial operations (direct investment) .

Since the collection of 2009 data, the scope of the OECD Global Insurance Statistics questionnaire has been expanded. These changes led to the collection of key balance sheet and income statement items for direct insurance and reinsurance sectors, such as: gross claims paid, outstanding claims provision (changes), gross operating expenses, commissions, total assets, gross technical provisions (of which: unit-linked), shareholder equity, net income.

STAN Bilateral Trade Database by Industry and End-use category (BTDIxE) provides values of imports and exports (as well as re-imports and re-exports) of goods broken down by industrial sectors and by end-use categories. BTDIxE was designed to extend the old BTD database which provided bilateral trade in goods by industry only.  BTDIxE allows, for example, insights into the patterns of trade in intermediate goods between countries to track global production networks and supply chains, and it helps to address policy issues such as trade in value added and trade in tasks.  The database presents estimates of bilateral flows of goods from 1990 to the latest available year, i.e. 2018; the latest year shown is subject to the availability of underlying product-based annual trade statistics.  Reporters are the OECD member countries and a large number of non-OECD economies, including the BRIICS: Brazil, the Russian Federation, India, Indonesia, People's Republic of China and South Africa; other selected G20 and Asian economies; and major African and Latin American nations.  It should be noted that starting from mid-2012, the OECD and the United Nations agreed to centralise the data collection and processing procedures within UNSD Comtrade.  The list of partners covers the OECD countries, more than a hundred of non-member economies as well as the partners "World", "Rest of the World" and "Unspecified". The partner "Total foreign trade" corresponds to the flows with partner "World" excluding intra-country flows. Trade flows are divided into economic activities based on the Revision 4 of ISIC and nine end-use categories including capital goods, intermediate goods and household consumption.

The OECD broadband database provides access to a range of broadband-related statistics gathered by the OECD. Policymakers must examine a range of indicators which reflect the status of individual broadband markets in the OECD. Source - https://www.oecd.org/digital/broadband/broadband-statistics/

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Business written in the reporting country on a gross and net premium basis. It contains a breakdown between domestic companies, foreign-controlled companies and branches and agencies or foreign companies.

CGPITRT: Central government personal income tax rates and threshold   This table reports statutory central government personal income tax rates for wage income plus the taxable income thresholds at which these statutory rates apply. The table also reports basic/standard tax allowances, tax credits and surtax rates. The information is applicable to a single person without dependents. The threshold, tax allowance and tax credit amounts are expressed in national currencies Tapered means that the tax relief basic amount is reduced with increasing income Further explanatory notes may be found in the Explanatory Annex This data represents part of the data presented within the Excel file “Personal income tax rates and thresholds for central governments - Table I.1”. The Data for 1981 to 1999 is not included here within as not all the data for these years is either available, or can be verified. The OECD tax database provides comparative information on a range of tax statistics - tax revenues, personal income taxes, non-tax compulsory payments, corporate and capital income taxes and taxes on consumption - that are levied in the 34 OECD member countries.” Tax policy Analysis homepage OECD Tax Database Taxing Wages Dissemination format(s) This data is also presented through the OECD Tax database webpage. OECD Tax Database

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Commissions in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Statistical population: CLIs are calculated for 33 OECD countries (Iceland is not included), 6 non-member economies and 8 zone aggregates. A country CLI comprises a set of component series selected from a wide range of key short-term economic indicators.   CLIs, reference series data (see below) and standardised business and consumer confidence indicators are presented in various forms.   Recommended uses and limitations: The composite leading indicator is a times series, formed by aggregating a variety of component indicators which show a reasonably consistent relationship with a reference series (e.g. industrial production IIP up to March 2012 and since then the reference series is GDP) at turning points. The OECD CLI is designed to provide qualitative information on short-term economic movements, especially at the turning points, rather than quantitative measures. Therefore, the main message of CLI movements over time is the increase or decrease, rather than the amplitude of the changes. The OECD’s headline indicator is the amplitude adjusted CLI. In practice, turning points in the de-trended reference series have been found about 4 to 8 months (on average) after the signals of turning points had been detected in the headline CLI.

This dataset provides information on the level of public equipment installed by countries to managed and abate water pollution. It shows the percentage of national population connected to "public" sewerage networks and related treatment facilities, and the percentage of national population connected to "public" wastewater treatment plants, and the degree of treatment. Connected here means actually connected to a wastewater plants through a public sewage network. When analysing these data, it should be kept in mind that the optimal connection rate is not necessarily 100%. It may vary among countries and depends on geographical features and on the spatial distribution of habitats. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)

This dataset presents the Consolidated financial balance sheets by economic sector (Quarterly table 0710), according to SNA 2008 methodology. It comprises all flows, which record, by type of financial instruments, the financial transactions between institutional sectors.

This dataset presents the Consolidated financial transactions by economic sector (Quarterly table 0610), according to SNA 2008 methodology. It comprises all flows, which record, by type of financial instruments, the financial transactions between institutional sectors.

This dataset contains three earnings-dispersion measures - ratio of 9th-to-1st, 9th-to-5th and 5th-to-1st - where ninth, fifth (or median) and first deciles are upper-earnings decile limits, unless otherwise indicated, of gross earnings of full-time dependent employees. The dataset also includes series on: the incidence of low-paid workers defined as the share of full-time workers earning less than two-thirds of gross median earnings of all full-time workers; the incidence of high of high-paid workers defined as the share of full-time workers earning more than one-and-half time gross median earnings of all full-time workers; gender wage gap unadjusted and defined as the difference between median wages of men and women relative to the median wages of men.

This dataset traces net changes in terms of volume in the growing stock of standing wood on forest land. Forest depletion and growth describe balances or imbalances in different types of forests. The intensity of use of forest resources reflects various forest management methods and their sustainability. These data should be read in connection with other indicators, in particular land use changes and forest quality (species diversity, forest degradation), and be complemented with data on forest management practices and protection measures. Please bear in mind that definitions and estimation methods vary for some countries.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business datawhere composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Click to collapse Item coverage Outstanding investment by direct insurance companies, classified by investment category, by the companies' nationality and by its destination (domestic or foreign). As of 2009, investment data exclude assets linked to unit-linked products sold to policyholders.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010.Other commentsThe Task Force on Statistics of International Trade in Services maintains a matrix summarising the status of the trade in services data collection performed by International Organisations. The table displays links to the databases as well as update timetables, availability of metadata, availability of bilateral data, and other important characteristics.

Latest Version is available here: https://knoema.com/OECDEO2020DEC/economic-outlook-no-108-december-2020   Economic Outlook No 107 (EO107) 2/2   Given the unusual level of uncertainty caused by the Covid-19 pandemic, this Economic Outlook (EO107) presents two scenarios for each country and economy – one scenario in which a second outbreak occurs in most economies towards the end of this year (double-hit scenario) and an alternative scenario where the second outbreak is avoided (single-hit scenario).Furthermore, only a limited number of series is made available compared to past editions.   This data set presents the double-hit scenario.   The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in selected non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments, and government debt. For the non-OECD regions, foreign trade and current account series are available.   The database contains annual data (for all variables) and quarterly figures (for a subset of variables). Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was the 4 June 2020.   Concerning the aggregation of world trade, a new composition has been introduced, since projections are now made for the major non-OECD economies. Thus, besides OECD and the OECD euro area, the following new regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Azerbaijan, Kazakhstan, Turkmenistan, Brunei, Timor-Leste, Bahrain, Iran, Iraq, Kuwait, Libya, Oman, Qatar, Saudi Arabia, United Arab Emirates, Yemen, Ecuador, Trinidad and Tobago, Venezuela, Algeria, Angola, Chad, Rep. of Congo, Equatorial Guinea, Gabon, Nigeria, Sudan); with the remaining countries in a residual 'Rest of the World' group.

Latest version is available here: https://knoema.com/OECDEO2020DEC/economic-outlook-no-108-december-2020   Economic Outlook No 107 (EO107) 1/2   Given the unusual level of uncertainty caused by the Covid-19 pandemic, this Economic Outlook (EO107) presents two scenarios for each country and economy – one scenario in which a second outbreak occurs in most economies towards the end of this year (double-hit scenario) and an alternative scenario where the second outbreak is avoided (single-hit scenario).Furthermore, only a limited number of series is made available compared to past editions.   This data set presents the single-hit scenario.   The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in selected non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments, and government debt. For the non-OECD regions, foreign trade and current account series are available.   The database contains annual data (for all variables) and quarterly figures (for a subset of variables). Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was the 4 June 2020.   Concerning the aggregation of world trade, a new composition has been introduced, since projections are now made for the major non-OECD economies. Thus, besides OECD and the OECD euro area, the following new regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Azerbaijan, Kazakhstan, Turkmenistan, Brunei, Timor-Leste, Bahrain, Iran, Iraq, Kuwait, Libya, Oman, Qatar, Saudi Arabia, United Arab Emirates, Yemen, Ecuador, Trinidad and Tobago, Venezuela, Algeria, Angola, Chad, Rep. of Congo, Equatorial Guinea, Gabon, Nigeria, Sudan); with the remaining countries in a residual 'Rest of the World' group.

The OECD Economic Outlook analyzes the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labor markets, interest and exchange rates, balance of payments and government debt. For the non-OECD regions, foreign trade and current account series are available. Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labor Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was June 1, 2023. The aggregation of world trade takes into account the projections made for the main non-OECD economies. Thus, besides OECD and the OECD euro area, the following regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Algeria, Angola, Azerbaijan Bahrain, Brunei, Chad, Rep. of Congo, Ecuador, Equatorial Guinea, Gabon, Iran, Iraq, Kazakhstan, Kuwait, Libya, Nigeria, Oman, Qatar, Saudi Arabia, Sudan, Timor-Leste , Trinidad and Tobago, Turkmenistan, United Arab Emirates, Yemen, Venezuela); with the remaining countries in a residual 'Rest of the World' group.

This indicator presents internationally comparable data regarding the labour force status and the educational attainment level by the National Educational Attainment Categories (NEAC) as reported by the labour force survey (LFS) and published in OECD Education at a Glance 2017. For trend data, the Education at a Glance Database includes data from 1981 to 2016 (or years with available data).

 This indicator measures the proportion of earnings that are lost to either higher taxes or lower benefit entitlements when a jobless person takes up employment. It is commonly referred to as "Participation Tax Rate (PTR)" as it measures financial disincentives to participate in the labour market.

Related data is available here: https://knoema.com/PTRCCSA/ptrs-for-parents-claiming-guaranteed-minimum-income-gmi-benefits-and-using-childcare-services This indicator measures the proportion of earnings that are lost to either higher taxes, lower benefits or childcare costs when a parent with young children takes up full-time employment and requires use of centre-based childcare services.

The Fisheries Committee (COFI) from the Trade and Agriculture Directorate (TAD) collects, on an annual basis from all its participating countries, data on landings, aquaculture production, fleet, employment in the fisheries sector, and government financial transfers. Data are collected from Fisheries Ministries, National Statistics Offices and other institution designated as an official data source. Concepts Classifications Data are collected by the OECD using the methodologies established by the Coordinating Working Party on Fishery Statistics (CWP) (www.fao.org/fishery/cwp/search/en). This inter-agency body, created in 1960 to develop common procedures and standards for the collation of fisheries statistics, provides technical advice on fishery statistical matters. Its handbook of Fishery Statistical Standards comprises definitions of the various concepts used in fishery statistics, with the exception of Government Financial Transfers which is unique to the OECD. All other statistics are based on the CWP definitions. The OECD, a partner with the CWP, additionally collects information on values for its landings and records the breakdown between the types of landings (i.e. landings in domestic ports, landings in foreign ports) data series which are not collected by the FAO. While a number of countries cover landings in a similar fashion, the same does not hold true for capacity (feet/meters, GRT/engine powers), or for employment for which both Full-time equivalents or numbers of people are used. The OECD therefore does not duplicate FAO statistics but requests complementary information to feed its analytical work.

The financial indicators in this dataset are derived from OECD countries’ financial accounts (transactions): they give a picture of the short-term behavior of institutional sectors. They comprise for instance: Net financial transactions of the general government, as a percentage of Gross Domestic Product (GDP), which corresponds to the general government deficit; Transactions in financial assets of Households and NPISHs, as a percentage of Households Gross Disposable Income (GDI); Transactions in liabilities of Households and NPISHs, as a percentage of GDI.

The financial indicators in this dataset are constructed from OECD countries’ financial balance sheets (stocks): these ratios are considered as relevant to analyse the position and performance of the various institutional sectors. They comprise for instance: Financial net worth of Households and NPISHs, as a percentage of GDI; Non-financial corporations debt to equity ratio; Private sector debt; Leverage of the banking sector; General government debt, as a percentage of GDP.

The Fisheries R&D expenditures dataset contains the budgetary expenditures in research and development on total budgetary FSE. Three variables are presented in this dataset:  • R&D expenditures - they are budgetary expenditures that finance research and development activities related to fisheries, irrespective of the institution (private or public, ministry, university, research centre or fisher group) or where they take place, the nature of research (scientific, institutional, etc.), or its purpose. The focus is on research and development expenditures on applied research related to the fisheries sector. Social-sciences research related to fisheries is included. It is also included data dissemination when associated primarily with research and development (knowledge generation), e.g. reports from research and databases developed as an adjunct to research. •FISHERIES SUPPORT ESTIMATE - Budgetary - it is the annual monetary value of gross transfers from taxpayers to fishers arising from policy measures that support fisheries, regardless of their nature, objectives or impacts. Data on FSE are collected by the Fisheries Committee (COFI) from the Trade and Agriculture Directorate (TAD) on an annual basis from all its participating countries. Data are provided by Fisheries Ministries, National Statistics Offices and other institution designated as an official data source. The original financial data is collected in national currency at current values; they are converted and published also in US dollars, for analytical purposes and to allow data comparisons. • Share of R&D expenditures on FSE - it is the share of budgetary research and development expenditures on total budgetary FSE. Please notice that total budgetary FSE is defined ‘net’, i.e. it is adjusted for costs incurred by fishers in order to receive the support. Whenever these costs are of significant amount, total budgetary FSE becomes remarkably low or negative. The corresponding share of research and development expenditures turns into a percentage exceptionally high or negative.

The OECD Fisheries Support Estimates (FSE) database is intended to be the best source of information on fisheries policies in OECD members and participating non-OECD economies.   It is designed to monitor and quantify developments in fisheries policy, to establish a common basis for policy dialogue among countries, and to provide economic data to assess the effectiveness and efficiency of policies.   These tables report country programmes data aggregated according to the main categories presented in the FSE Manual.   More detailed documentation on country programmes can be found in country-level metadata; more data on country programmes can be found in the full dataset (Excel Format - link provided below). Statistics are organized in pivot tables to make possible cross-country comparisons and to filter disaggregated policy-level data by policy implementation criteria and country.   The FSE data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies.   Data on landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.

Fisheries fleet: The FAO has a two dimensional definition, of which the OECD only uses the concept of fishing vessel. Fishery Fleet: The term "fishery fleet" or "fishery vessels" refers to mobile floating objects of any kind and size, operating in freshwater, brackishwater and marine waters which are used for catching, harvesting, searching, transporting, landing, preserving and/or processing fish, shellfish and other aquatic organisms, residues and plants. Fishing vessel: The term "fishing vessel" is used instead when the vessel is engaged only in catching operations. Gross Register Tonnage: The Gross Register Tonnage represents the total measured cubic content of the permanently enclosed spaces of a vessel, with some allowances or deductions for exempt spaces such as living quarters (1 gross register ton = 100 cubic feet = 2.83 cubic metres).

Freshwater abstractions:   This dataset shows water abstractions by source (surface and ground water) and by major uses. Water abstractions refer to water taken from ground or surface water sources and conveyed to the place of use. If the water is returned to a surface water source, abstraction of the same water by the downstream user is counted again in compiling total abstractions.   When interpreting those data, it should be borne in mind that the definitions and estimation methods employed by member countries may vary considerably.   Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)  

Date is taken as per country metadata, and which is not having any metadata date is considered as 2023

The GID-DB is a database providing researchers and policymakers with key data on gender-based discrimination in social institutions. This data helps analyse women’s empowerment and understand gender gaps in other key areas of development.Covering 180 countries and territories, the GID-DB contains comprehensive information on legal, cultural and traditional practices that discriminate against women and girls.

This part contains general information on number of insurance companies and employees within the sector.

This data set contains information of The insurance industry is a major component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays by covering personal and business risks. This annual report monitors global insurance market trends to support a better understanding of the insurance industry's overall performance and health.The OECD has collected and analysed data on insurance such as the number of insurance companies and employees, insurance premiums and investments by insurance companies dating back to the early 1980s. Over time, the framework of this exercise has expanded and now includes key balance sheet and income statement items for the direct insurance and reinsurance sector.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Gross claims payments in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. This part contains gross operating expenses in the reporting country, with a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Productivity is a key driver of economic growth and changes in living standards. Labour productivity growth implies a higher level of output for unit of labour input (hours worked or persons employed). This can be achieved if more capital is used in production or through improved overall efficiency with which labour and capital are used together, i.e., higher multifactor productivity growth (MFP). Productivity is also a key driver of international competitiveness, e.g. as measured by Unit Labour Costs (ULC).   The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, some time lag may arise which affects individual series and/or countries for two reasons: first, hours worked data from the OECD Employment Outlook are typically updated less frequently than the OECD Annual National Accounts Database; second, source data for capital services are typically available in annual national accounts later than source data for labour productivity and ULCs.   Note to users: The OECD Productivity Database accounts for the methodological changes in national accounts' statistics, such as the implementation of the System of National Accounts 2008 (2008 SNA) and the implementation of the international industrial classification ISIC Rev.4. These changes had an impact on output, labour and capital measurement. For Chile, China, Colombia, India, Japan, Turkey and the Russian Federation the indicators are in line with the System of National Accounts 1993 (1993 SNA); for all other countries, the indicators presented are based on the 2008 SNA

Cancer follow up has been given for the range of 5 years. The highest range has been considered as for this period, for example 1995-2000 is considered as 2000.

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.B1:B4

A System of Health Accounts 2011 provides an updated and systematic description of the financial flows related to the consumption of health care goods and services. As demands for information increase and more countries implement and institutionalise health accounts according to the system, the data produced are expected to be more comparable, more detailed and more policy relevant. It builds on the original OECD Manual, published in 2000 to create a single global framework for producing health expenditure accounts that can help track resource flows from sources to uses. It is the result of a collaborative effort between the OECD, WHO and the European Commission, and sets out in more detail the boundaries, the definitions and the concepts – responding to health care systems around the globe – from the simplest to the more complicated. The accounting framework is organised around a tri-axial system for the recording of health care expenditure, namely classifications of the functions of health care (ICHA-HC), health care provision (ICHA-HP), and financing schemes (ICHA-HF).

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

This dataset presents annual population data from 1950 to 2050 by sex and five year age groups as well as age-dependency ratios. The data is available for 46 countries. Data from 1950 to 2011 (2012) are historical data while data from 2012 (2013) are projections. In order to estimate the population in coming years, fertility rate, life expectancy and level of immigration have to be estimated. Assumptions underlying the estimations of each of these three elements are usually categorise as low, medium or high within one specific country. Where a range of projections are available, the projection data presented here are based on the "medium variant". Assumptions underlying the projection data shown are described country per country in the metadata table as well as the source of data. There are three sources for the data: national statistical institutes, Eurostat or the United Nations. The population data is presented in 18 five year age groups which refer to the population from 0-4 to 85 and more. The following age groups are also available: less than 15, less than 20, 15 to 64, 20-64, 65 and over. Age-dependency ratios are also presented. Assumptions by country. Data are presented for 46 countries. The 34 OECD member countries, the 6 EU countries not belonging to the OECD, and Brazil, Colombia, India, Indonesia, China, Russia and South Africa.

Unit of measure usedIndex: Year 2015 = 100 The Hourly Earnings (MEI) dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 35 OECD member countries and for selected non-member economies.  The MEI Earnings dataset provides monthly and quarterly data on employees' earnings series. It includes earnings series in manufacturing and for the private economic sector. Mostly the sources of the data are business surveys covering different economic sectors, but in some cases administrative data are also used. The target series for hourly earnings correspond to seasonally adjusted average total earnings paid per employed person per hour, including overtime pay and regularly recurring cash supplements. Where hourly earnings series are not available, a series could refer to weekly or monthly earnings. In this case, a series for full-time or full-time equivalent employees is preferred to an all employees series.

This indicator shows the working hours needed to escape poverty for a jobless family claiming Guaranteed Minimum Income benefits.

How’s Life? Well-being is the one-stop shop for the 80+ indicators of the OECD Well-being Dashboard, providing information on current well-being outcomes, well-being inequalities and the resources and risks that underpin future well-being. The 11 dimensions of current well-being relate to material conditions that shape people’s economic options (Income and Wealth, Housing, Work and Job Quality) and quality-of-life factors that encompass how well people are (and how well they feel they are), what they know and can do, and how healthy and safe their places of living are (Health, Knowledge and Skills, Environmental Quality, Subjective Well-being, Safety). Quality of life also encompasses how connected and engaged people are, and how and with whom they spend their time (Work-Life Balance, Social Connections, Civic Engagement). The distribution of current well-being is taken into account by looking at three types of inequality: gaps between population groups (horizontal inequalities); gaps between those at the top and those at the bottom of the achievement scale in each dimension (vertical inequalities); and deprivations (i.e. the share of the population falling below a given threshold of achievement). The systemic resources that underpin future well-being over time are expressed in terms of four types of capital: Economic, Natural, Human and Social.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

http://www.oecd.org/els/soc/IDD-Metadata.pdf

Data source(s) used The inland fisheries data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.   Data are collected in tonnes and national currency at current values. For analytical purposes and data comparisons, value data are converted and published also in US dollars. Exchange rates are average yearly spot rates, taken from the dataset OECD Economic Outlook: Statistics and Projections. Data reported in this dataset are expressed in tonnes, in units of national currency and in US dollars. Data are recorded on a landed weight basis, i.e. the mass (or weight) of a product at the time of landing, regardless of the state in which is landed (i.e. whole, gutted, filleted, meal, etc.). For exceptions, please see the individual notes. Statistical population The statistical population is the set of countries participating in the work of the COFI, i.e. OECD members, excluding landlocked countries, with some exceptions (Czech Republic and Slovakia are included, Israel is not). The group includes also the following partner countries: Argentina, China, Colombia, Costa Rica, Indonesia, Lithuania, Peru, Philippines, Thailand and Chinese Taipei. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates. Key statistical concept Inland fisheries include catches of fish, crustaceans, molluscs and other aquatic invertebrates (and animals), residues and seaweeds in lakes, rivers, ponds, inland canals and other land-locked water bodies. For the purpose of this questionnaire the boundary between inland and marine areas at the river mouth is left to the discretion of the national authority. Production from aquaculture installations should not be reported on this form. However, catches from fisheries that are managed by stocking should be included. The methodological reference document for fisheries and aquaculture statistics is the CWP Handbook of Fishery Statistics.

Institutional Investors' Assets and Liabilities data are reported by Central Banks, National Statistical Institutes or Supervisory Authorities. The indicators reported here are compiled on the basis of those statistics.   The first set of indicators measure total financial assets (liabilities) held by each institutional investor as a percentage of GDP. Total financial assets (liabilities) is defined as the sum of the following asset (liability) categories: currency and deposits (F2), debt securities (F3), loans (F4), equity and investment fund shares (F5), insurance pension and standardized guarantee schemes (F6), financial derivatives and employee stock options (F7), and other accounts receivable (payable) (F8). The second set of indicators shows the share of each asset (liability) category in the total financial assets (liabilities) of each investor. They help to analyse the investment portfolio composition of the investor as well as financial risks borne by the investor. The third set of indicators shows the sub-sector composition of total financial assets (liabilities) by investor category, by showing the share of each sub-sector in the total financial assets (liabilities) of each investor category.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Breakdown of net premiums written in the reporting country in terms of domestic risks and foreign risks, thus providing an indicator of direct cross-border operations of insurance business.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Covers business written abroad by branches, agencies and subsidiaries established abroad of domestic undertakings and includes all business written outside the country by these entities (in both OECD and non-OECD countries).

This data deals with premiums written by classes of non-life insurance for the business written in the reporting country.

Geographic coverage OECD countries, Selected African and Asian countries, Selected Latin American countries Institutional coverage The insurance industry is a key component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays in covering personal and business risks. The "OECD Insurance Statistics" publication provides major official insurance statistics for all OECD countries. The reader will find information on the diverse activities of this industry and on international insurance market trends. The data, which are standardised as far as possible, are broken down under numerous sub-headings, and a series of indicators makes the characteristics of the national markets more readily comprehensible. This publication is an essential tool for civil servants, businessmen and academics working in the insurance field. Item coverage This part consists of tables by indicators, which reflect the most significant characteristics of the OECD insurance market. In most cases, the tables contain data of all OECD countries as well as aggregated "OECD", "EU15" (the 15 member countries of the European Union in 1995) and "NAFTA" data from 1983 to 2015, for the following categories: - life insurance, - non-life insurance - and total. The premiums amounts are converted from national currencies into US dollar. Exchange rates used are end-of-period exchanges rates for all variables valued at the end of the year, and period-average for variables representig a flow during the year.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

This dataset presents official international trade statistics in fisheries products, directly sourced from the UN Comtrade Database.

The International Transport Forum collects, on a quarterly basis, monthly data from all its Member countries. When monthly information is not available then quarterly data is provided. The survey contains a dozen variables selected for their quarterly availability among reporting countries. Data are collected from Transport Ministries, statistical offices and other institution designated as official data source. The survey used for this exercise is the ITF "Quarterly Transport Statistics". Variables collected are rail, road and inland waterways goods transport (T-km), rail passengers (P-km), road traffic (V-km), first registration of brand new vehicles, petrol deliveries to the road transport sector and road fatalities. Although there are clear definitions for all the terms used in this survey, countries might have different methodologies to gather or estimate quarterly data. The information provided in short-term surveys does not necessarily have the same coverage as annual data exercises and therefore remains provisional. Depending on countries, data is not always revised so totals might not correspond to the sum of the elements. The main purpose of this data collection is to identify in advance changes in transport data trends. In case of missing data for a country, ITF can calculate estimates based generally on growth rates from previous years or from data available from other sources. These estimates are used solely to calculate aggregated trends in graphic representations and are not shown at the individual country level.  

The Key Economic Indicators (KEI) database contains monthly and quarterly statistics (and associated statistical methodological information) for all OECD member countries and for a selection of non-member countries on a wide variety of economic indicators, namely: quarterly national accounts, industrial production, composite leading indicators, business tendency and consumer opinion surveys, retail trade, consumer and producer prices, hourly earnings, employment/unemployment, interest rates, monetary aggregates, exchange rates, international trade and balance of payments.

This dataset contains data on employment by hour bands for usual weekly hours worked in the main job.  Standard hour bands are reported for most countries.  Actual hours of work instead of usual hours of work are only available in some countries (Japan and Korea).  Data are broken down by professional status - employees, total employment - by sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed in thousands of persons. For detailed information on labour force surveys for all countries please see the attached file : www.oecd.org/els/employmentpoliciesanddata/LFSNOTE

The productivity and income estimates presented in this dataset are mainly based on GDP, population and employment data from the OECD Annual National Accounts. Hours worked are sourced from the OECD Annual National Accounts, the OECD Employment Outlook and national sources. The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, timely data issues may arise and affect individual series and/or individual countries. In particular, annual hours worked estimates from the OECD Employment Outlook are typically updated less frequently (once a year, in the summer) than series of hours worked from the OECD Annual National Accounts.

This table contains labour force data on labour market status - population, labour force, unemployment and employment - by sex and by detailed age groups and standard age groups (15-24, 25-54, 55-64, 65+, total). Note: Population figures reported in table LFS by sex are Census-based, while the data for this table are taken from labour force surveys. Population for total age group refers to working age population (15 to 64 years).

The OECD Long-Term Baseline is a projection of some major economic variables beyond the short-term horizon of the OECD Economic Outlook. It covers all OECD economies, non-OECD G20 economies and selected key partners. The projection horizon is currently 2060. For the historical period and the short-run projection horizon, the series are consistent with those of the OECD Economic Outlook number 114. The definitions, sources and methods are also generally the same. For more details on the methodology, please see boxes and Annex in Guillemette, Y. and J. Château (2023), 'Long-Term Scenarios: Incorporating the Energy Transition', OECD Economic Policy Papers, No. 33, OECD Publishing, Paris, and references therein. The baseline scenario is a projection conditional on a number of assumptions, notably that countries do not carry out institutional and policy reforms (see section 2 of the reference cited above). It is used as a reference point to illustrate the potential impact of structural reforms in alternative scenarios. The energy transition scenario is an alternative scenario with accelerated energy transition broadly consistent with net zero GHG emissions by 2050 (see section 3 of the reference cited above).

Main Economic Indicators (MEI) provides a wide range of indicators on recent economic developments in the 35 OECD member countries and 15 non-member countries. The indicators published in MEI have been prepared by national statistical agencies primarily to meet the requirements of users within their own country. In most instances, the indicators are compiled in accordance with international statistical guidelines and recommendations. However, national practices may depart from these guidelines, and these departures may impact on comparability between countries.

IPAW = Income as a percentage of the average wage This data is updated after the finalisation of the Taxing Wages publication for the corresponding year. This table reports marginal personal income tax and social security contribution rates for a single person without dependent, at various multiples (67%, 100%, 133%, 167%) of the AW/APW. The average wage (AW) by country and year can be found within the Taxing Wages comparative tables dataset, under the indicator heading: Total gross earnings before taxes (national currency). The AW is based on a single person at 100% of average earnings, no child. The results, derived from the OECD Taxing Wages framework (elaborated in the annual publication Taxing Wages), use tax rates applicable to the tax year. The results take into account basic/standard income tax allowances and tax credits and include family cash transfers (see Taxing Wages). The marginal rates are expressed as a percentage of gross wage earnings, with the exception of the Total tax wedge which is expressed as a percentage of gross labour costs (gross wages + employer SSC). The sub-central personal tax rates used in this table correspond to those used in Taxing Wages. The figures may differ from those published in Taxing Wages where updated information is available, such as revised AW/APW data. Further explanatory notes may be found in the Explanatory Annex.

Database published : June 2020 

Database published : June 2020 

The Financial Statistics dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 36 OECD member countries and some selected other countries. The dataset itself contains financial statistics on 4 separate subjects: Monetary Aggregates, Interest Rates, Exchange Rates, and Share Prices. The data series presented within these subjects have been chosen as the most relevant financial statistics for which comparable data across countries is available. In all cases a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis. All data are available monthly, and are presented as either an index (where the year 2015 is the base year) or as a level depending on which measure is seen as the most appropriate and/or useful in the economic analysis context.

This dataset presents information using an "indicator" approach, focusing on cross-country comparisons. The aim is to make the accounts more accessible and informative, whilst taking the opportunity to present the conceptual underpinning  and comparability issues of each of the indicators presented. The range of indicators is set deliberately wide to reflect the richness of the national accounts dataset and to encourage users of economic statistics to refocus some of the spotlight that is often placed on GDP to other important economic indicators, which may better respond to their needs. Indeed many users themselves have been instrumental in this regard. The report of the Commission on the Measurement of Economic Performance and Social Progress (Stiglitz-Sen-Fitoussi Commission) is but one notable example. That is not to undermine the importance of GDP, which arguably remains the most important measure of total economic activity, but other measures may better reflect other aspects of the economy. For example, net national income may be a more appropriate measure of income available to citizens in countries with large outflows of property income, and household adjusted disposable income per capita may be a better indicator of the material well-being of citizens. But certainly from a data perspective more can and remains to be done. The Stiglitz-Sen-Fitoussi Commission for example highlights the pressing need for the provision, by official statistics institutes, of more detailed information that better describes the distributional aspects of activity, especially income, and the need to build on the national accounts framework to address issues such as non-market services produced by households or leisure. It is hoped that by producing a publication such as this and thereby raising awareness, the momentum from this and other initiatives will be accelerated. The publication itself will pick up new indicators in the future as they become available at the OECD.

National Accounts - Volume IIIa - Financial Accounts - Flows, which record, by type of financial instruments, the financial transactions between institutional sectors, and are presented in two tables: Financial accounts, consolidated and Financial accounts, non-consolidated.

It provides a breakdown of government expenditure according to their function. To meet this end, economic flows of expenditure must be aggregated according to the Classification of the Functions of Government (COFOG).

It presents the three approaches of the GDP: expenditure based, output based and income based. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers measuring the evolution of residential property prices over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. Among their professional uses, they serve, for example, to monitor macroeconomic imbalances and risk exposure of the financial sector. This dataset includes RPPI compiled by official statistical agencies following international statistical guidelines. It covers all OECD member countries and some non-member countries. Whenever possible, these RPPIs are broken down by region, dwelling type (single- and multi-family dwellings) and vintage (new and existing dwellings). This dataset presents, for each country, the RPPI that is available at the most aggregate level at both national and regional levels. It mainly contains quarterly statistics. At regional level, the available RPPIs are classified according to the OECD Territorial Level (TL) classification whenever possible. Regions within the 37 OECD countries are classified on two territorials level reflecting the administrative organisation of countries. The 394 OECD large regions (TL2) represent the first administrative tier of subnational government, for example, the Ontario Province in Canada. The 2258 OECD small regions (TL3) correspond to administrative regions, with the exception of Australia, Canada and the United States. This classification – which, for European countries, is largely consistent with the Eurostat NUTS 2016 – facilitates greater comparability of geographic units at the same territorial level.The dataset called “National and Regional House Price Indices” contains the full list of available RPPIs. The dataset called “Analytical house price indicators” contains, in addition to nominal RPPIs, information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. The datasets “Analytical house price indicators” and “National and Regional House Price Indices – Headline Indicators” do not refer to the same price indices for Brazil, Canada, China, Germany, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “National and Regional House Price Indices”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap.For all other countries, non-seasonally adjusted price indices in both datasets are identical on the overlapping period.

This dataset presents the Non-consolidated financial balance sheets by economic sector (Quarterly table 0720), according to SNA 2008 methodology. It comprises all flows, which record, by type of financial instruments, the financial transactions between institutional sectors.

This dataset presents the Non-consolidated financial transactions by economic sector (Quarterly table 0620), according to SNA 2008 methodology. It comprises all flows, which record, by type of financial instruments, the financial transactions between institutional sectors.

The dataset on Quarterly Sector Accounts data presents the whole set of non financial accounts for the institutional sectors.It includes the following accounts: - Production account / External account of goods and services - Generation of income account - Allocation of primary income account - Secondary distribution of income account - Use of disposable income account - Change in net worth due to saving and capital transfers accounts - Acquisitions of non-financial assets account - Balance sheets for non-financial assets - Employment by sector These accounts are designed to produce accounting balances that are of particular interest for economic analysis such as value added, operating surplus, saving or net lending/net borrowing. Quarterly Sector Accounts data have been reported to the OECD by Member countries and Key Partner countries using a standard questionnaire (simplified table T0119 or detailed table T0801). These questionnaires are designed to collect internationally comparable data according to definitions and concepts presented in the System of National Accounts (SNA 2008 or SNA 1993 for a few countries):

Non-medical determinants of health: Unhealthy lifestyles and poor environments cause millions of people to die prematurely. Smoking, harmful alcohol use, physical inactivity and obesity are the root cause of many chronic conditions. This dataset presents the latest data for tobacco consumption (including daily smokers by age and sex), vaping (by age and sex), alcohol consumption, fruits and vegetables consumption, as well as measured and self-reported data on overweight and obesity.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are :patents have a close link to invention;patents cover a broad range of technologies on which there are sometimes few other sources of data;the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); andpatent data are readily available from patent offices. However, patents are subject to certain drawbacks:the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value;many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.;the propensity to patent differs across countries and industries;differences in patent regulations make it difficult to compare counts across countries; andchanges in patent law over the years make it difficult to analyse trends over time. 

The OECD Pensions at a Glance Database has been developed in order to serve a growing need for pensions indicators. It includes reliable and internationally comparable statistics on public and mandatory and voluntary pensions. It covers 34 OECD countries and aims to cover all G20 countries. Pensions at a Glance reviews and analyses the pension measures enacted or legislated in OECD countries. It provides an in-depth review of the first layer of protection of the elderly, first-tier pensions across countries and provideds a comprehensive selection of pension policy indicators for all OECD and G20 countries.

This dataset presents annual population projections data up to 2061 by sex and five year age groups as well as the share of children, youth, the elderly, old-age and total dependency ratios. The data is available for all 38 member countries as well as for the EU27 and G20 countries, Singapore and the World total. Population projections are, in most countries, according to medium variant. (See country details for the variants retained for each demographic component of total fertility, life expectancy at birth and net annual migration).

The OECD has collected data for public expenditure on labour market programmes (LMPs) continuously since the mid-1980s. For most longstanding Member countries, data according to a consistent classification system and definition of scope are available for reference years 1985 to 2002. Starting with reference year 1998, Eurostat started collecting and publishing data according to a somewhat different classification system and definition of scope. In line with agreements for bilateral coordination of data collection, the OECD after some time adopted - for non-Eurostat OECD Member countries as well as Eurostat countries – most of the features of the Eurostat system. This allows the OECD to use data collected by Eurostat rather than making a separate data request to the 20 Eurostat countries that are members of the OECD. OECD data according to the "new" classification and definition of scope are generally available for reference year 2002 onwards, or 1998 onwards for Eurostat countries. These data are often used in time-series applications, e.g. for documenting long-term trends in total social expenditure (ìn which labour market programmes are one component), or in time-series regressions that attempt to estimate the impact of training programmes vs. job-creation programmes on unemployment. It is no longer practicable to do such work using only the "old" data which stop in 2002 or the "new" data which start in 2002 or 1998. If the two data sets are combined using crude extrapolation and splicing techniques, time-series movements will result primarily from statistical breaks (i.e. changes in definition and coverage of the statistics) rather than real changes in spending patterns. The unit of measure used depends on the members in dimension 'Country', 'Measure'

The Public Sector Debt database includes quarterly detailed information on all liabilities which constitute debt instruments, by initial and residual maturity, which are held by the government, and more broadly the public sector. The debt instruments are those instruments that require the payment of principal and interest or both at some point(s) in the future. All liabilities are considered debt, except liabilities in the form of equity and investment fund shares and, financial derivatives and employee stock options.

OECD has extracted monthly trade data from the UN Monthly Comtrade database, and aggregates the quarterly and annual frequencies by summing up the months. This may create discrepancies with annual trade figures as presented in International Trade by Commodity Statistics (ITCS). UN Monthly Comtrade (beta version) contains detailed merchandise trade data provided by countries (or areas) to the United Nations Statistics Division, Department of Economic and Social Affairs (UNSD/DESA). Values are expressed in United States dollars (USD) and refer to declared transaction values. All exports are valued f.o.b. (free on board) and imports are valued c.i.f. (including cost, insurance, freight), except the imports of Canada and Mexico which are valued f.o.b. Detailed country metadata (currency conversion rates, information in HS classifications and data publication dates) can be found from the metadata file at the UN Monthly Comtrade website under the heading Metadata.

The OECD's quarterly national accounts (QNA) dataset presents data collected from all the OECD member countries and some other major economies on the basis of a standardised questionnaire. It contains a wide selection of generally seasonally adjusted quarterly series most widely used for economic analysis from 1960 or whenever available:

This database provides a set of indicators that reflect the level and structure of central government support for business R&D; in form of R&D; tax incentives and direct funding across OECD member countries and ten non-member economies (Argentina, Brazil, Bulgaria, Croatia, Cyprus, People's Republic of China, Romania, Russian Federation, and South Africa). This includes time-series indicators of tax expenditures for R&D;, based on the latest 2017 OECD data collection on tax incentive support for R&D; expenditures that was completed in July 2017. These estimates of the cost of R&D; tax relief have been combined with data on direct R&D; funding, as compiled by National Statistical Offices based on reports from firms, in order to provide a more complete picture of government efforts to promote business R&D.; The latest indicators and information on R&D; tax incentives also feature on the dedicated OECD website Measuring R&D; tax incentives.Tax expenditures are deviations from a benchmark tax system (OECD, 2010) and countries use different national benchmarks. Available estimates typically reflect the sum of foregone tax revenues – on an accruals basis – and refunds where applicable, with no or minimal adjustments for behavior effects. Some countries only report claims realised in a given year (cash basis), while others report losses to government on an accrual basis, excluding claims referring to earlier periods and including claims for current R&D; to be used in the future. For general and country-specific notes on the estimates of government tax relief for R&D; expenditures (GTARD), see http://www.oecd.org/sti/rd-tax-stats-gtard-notes.pdfThe sources for the other indicators (direct funding of BERD, BERD and GDP) include the OECD databases on Main Science and Technology Indicators and Eurostat R&D; statistics.

This dataset presents reference statistics (GDP, Total Government Expenditure, deflators, etc.) that are used to calculate some of the indicators on educational expenditure included in the indicators dataset.

The Regional well-being dataset presents eleven dimensions central for well-being at local level and for 395 OECD regions, covering material conditions (income, jobs and housing), quality of life (education, health, environment, safety and access to services) and subjective well-being (social network support and life satisfaction). The set of indicators selected to measure these dimensions is a combination of people's individual attributes and their local conditions, and in most cases, are available over two different years (2000 and 2014). Regions can be easily visualised and compared to other regions through the interactive website [www.oecdregionalwellbeing.org]. The dataset, the website and the publications "Regions at a Glance" and "How’s life in your region?" are outputs designed from the framework for regional and local well-being. The Regional income distribution dataset presents comparable data on sub-national differences in income inequality and poverty for OECD countries. The data by region provide information on income distribution within regions (Gini coefficients and income quintiles), and relative income poverty (with poverty thresholds set in respect of the national population) for 2013. These new data complement international assessments of differences across regions in living conditions by documenting how household income is distributed within regions and how many people are poor relatively to the typical citizen of their country. For analytical purposes, the OECD classifies regions as the first administrative tier of sub-national government, so called Territorial Level 2 or TL2 in the OECD classification. This classification is used by National Statistical Offices to collect information and it represents in many countries the framework for implementing regional policies. Well-being indicators are shown for the 395 TL2 OECD regions, equivalent of the NUTS2 for European countries, with the exception for Estonian where well-being data are presented at a smaller (TL3) level and for the Regional Income dataset, where Greece, Hungary and Poland data are presented at a more aggregated (NUTS1) level.

The Registered Unemployment and Job Vacancies dataset is a subset of the Short-Term Labour Situation database, which contains predominantly monthly statistics, and associated statistical methodological information, for the 34 OECD member countries and for selected other economies. There are basically two sources for unemployment statistics: labour force surveys and administrative data. Surveys are based on standard methodology and procedures used all over the world while administrative data are subject to national legislations which evolve through time. Consequently registered unemployment data are not comparable across countries. The relationship between survey and registered unemployment is not the same for all countries. Number of registered unemployed persons and registered unemployment rates are presented here because they are monthly and quickly available after their reference period. The job vacancies data provides estimates of the number of unfilled job vacancies across national economies. Series give an indication of the labour demand while the unemployment is linked with the labour supply.

Data on government sector receipts, and on taxes in particular, are basic inputs to most structural economic descriptions and economic analyses and are increasingly used in international comparisons. This annual database presents a unique set of detailed and internationally comparable tax data in a common format for all OECD countries.

Although there are clear definitions for all the terms used in this survey, countries might have different methodologies to calculate tonne-kilometre and passenger-kilometres. Methods could be based on traffic or mobility surveys, use very different sampling methods and estimating techniques which could affect the comparability of their statistics. Also, if the definition on road fatalities is very clear and well applied by most countries, this is not the case for road injuries. Indeed, not only countries might have different definitions but the important underreporting of road injuries in most countries can distort analysis based on these data. 

Demand for statistics on business demography has grown and developed considerably in recent years. Data on births and deaths of enterprises, their life expectancy and the important role they play in economic growth and productivity, as well as the information they provide for tackling social demographic issues, are increasingly requested by policy makers and analysts alike. Business demography is a core element of the OECD’s Entrepreneurship Indicators Project, where the OECD and Eurostat are collaborating to develop a framework for the regular and harmonised measurement of entrepreneurial activity and the factors that enhance or impede it. The data in this database is presented in International Standard of Industrial Classification (ISIC Revision 4).

The OECD Secretariat collects a wide range of statistics on businesses and business activity. This database features the data collection of the Statistics Directorate relating to a number of key variables, such as value added, operating surplus, employment, and the number of business units, for example, broken down by 4-digit International Standard of Industrial Classification (ISIC Revision 4) industry groups (including the service sector)), referred to as the Structural Statistics on Industry and Services (SSIS) database; and by size class; referred to as the Business Statistics by Size Class (BSC) database.

The Short-Term Labour Market Statistics dataset contains predominantly quarterly labour statistics, and associated statistical methodological information, for the 35 OECD member countries and selected other economies. The Short-Term Labour Market Statistics dataset covers countries that compile labour statistics from sample household surveys on a monthly or quarterly basis. It is widely accepted that household surveys are the best source for labour market key statistics. In such surveys, information is collected from people living in households through a representative sample and the surveys are based on standard methodology and procedures used internationally. The subjects available cover: working age population by age; active and inactive labour force by age; employment by economic activity, by working time and by status; and, unemployment (including monthly harmonised unemployment) by age and by duration. Data is expressed in levels (thousands of persons) or rates (e.g. employment rate) where applicable.   Data are based on Labour Force Surveys and national information in this dataset is directly collected from the following sources:   ABS - Australian Bureau of Statistics (Australia) Statistics Canada (Canada) INE - Instituto Nacional de Estadísticas (Chile) CBS – Central Bureau of Statistics (Israel) Statistics Bureau (Japan) Statistics Korea (Korea) INEGI - Instituto Nacional de Estadísticas y Geografía (Mexico) Statistics New Zealand (New Zealand) BLS - Bureau of Labor Statistics (the United States) Eurostat (Austria, Belgium, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Luxembourg, the Netherlands, Norway, Poland, Portugal, the Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom).

Social expenditure aggregates: The OECD Social Expenditure Database (SOCX) has been developed in order to serve a growing need for indicators of social policy. It includes reliable and internationally comparable statistics on public and mandatory and voluntary private social expenditure at programme level. SOCX provides a unique tool for monitoring trends in aggregate social expenditure and analysing changes in its composition.

Excess capacity is one of the main challenges facing the global steel sector. The OECD Steelmaking Capacity database contains data on crude steelmaking capacity by economy and provides researchers and policymakers with an important tool for analysing steel capacity developments.

Student-teacher ratio refers to the average number of students per teacher, while average class size is the average number of students in a classroom.

This table shows the representative sub-central personal income tax rates, tax allowances and credits used.Applies to the wage income of a single person no dependants.Can be based on a representative city or an average of sub-central ratesMinimum and maximum sub-central rates across states and municipalities.Amounts of tax allowances are expressed in national currencies.Additional details on sub-central tax systems based on a progressive income tax rate structure are provided in Table I.7.Further explanatory notes may be found in the Explanatory Annex.  IndexS - State (state, provincial, regional, cantonal) taxation appliesL - Local (local, municipal) taxation appliesCT - Central government tax net of (central government) tax creditsCTg - Central government tax gross of tax creditsTY - Taxable income for central government tax purposesTYs - Taxable income modified for state government tax purposesTYI - Taxable income modified for local government tax purposes  

Data cited at: OECD (2020), Suicide rates (indicator). doi: 10.1787/a82f3459-en (Accessed on 18 August 2020) Suicide rates are defined as the deaths deliberately initiated and performed by a person in the full knowledge or expectation of its fatal outcome. Comparability of data between countries is affected by a number of reporting criteria, including how a person's intention of killing themselves is ascertained, who is responsible for completing the death certificate, whether a forensic investigation is carried out, and the provisions for confidentiality of the cause of death. Caution is required therefore in interpreting variations across countries. The rates have been directly age-standardised to the 2010 OECD population to remove variations arising from differences in age structures across countries and over time. The original source of the data is the WHO Mortality Database. This indicator is presented as a total and per gender and is measured in terms of deaths per 100 000 inhabitants (total), per 100 000 men and per 100 000 women.

Statutory corporate income tax rate - This table shows 'basic' (non-targeted) central, sub-central and combined (statutory) corporate income tax rates. Where a progressive (as opposed to flat) rate structure applies, the top marginal rate is shown.

Targeted statutory corporate income tax rate - This table reports central, sub-central and combined corporate income tax rates typically applying for or targeted at 'small (incorporated) business', where such 'targeting' is on the basis of size alone (e.g. number of employees, amount of assets, turnover or taxable income) and not on the basis of expenditures or other targeting criteria. A 'small business corporate tax rate' may be a special statutory corporate tax rate applicable to (all or part of) the taxable income of qualifying 'small' firms (e.g., meeting a turnover, income, or asset test), or an effective corporate tax rate below the basic statutory corporate rate provided through a tax deduction or credit for 'small' firms determined as a percentage of qualifying taxable income (e.g., up to a given threshold). If corporate income is taxed at progressive rates, the rate typically applying for 'small' firms should be reported. Where the central government, or sub-central government, or both, have a lower small business tax rate, the applicable central and sub-central rates are both shown (to enable a combined rate calculation). Thus, for example, where only the sub-central government has a small business rate, the basic central corporate income tax rate is shown in order to compute the combined central and sub-central tax rate on small business (a cross-check with Table II.3 shows whether the central or sub-central rate is basic or not).

Overall statutory tax rates on dividend income- reports effective statutory tax rates on distributions of domestic source income to a resident individual shareholder, taking account of corporate income tax, personal income tax and any type of integration or relief to reduce the effects of double taxation. PIT: Personal Income Tax CIT: Corporate Income Tax CL - Classical system (dividend income is taxed at the shareholder level in the same way as other types of capital income (e.g. interest income) MCL - Modified classical system (dividend income taxed at preferantial rates (e.g. compared to interest income) at the shareholder level. FI - Full imputation (dividend tax credit at shareholder level for underlying corporate profits tax) PI - Partial imputation (dividend tax credit at shareholder level for part of underlying corporate profits tax) PIN - Partial inclusion (a part of received dividends is included as taxable income at the shareholder level) SR - Split rate system (distributed dividends are taxed at higher rates than retained earnings at the corporate level) NST - No shareholder taxation of dividends (no other tax than the tax on corporate profits) CD - Corporate deduction (corporate level deduction, fully or partly, in respect of dividend paid) OTH - Other types of systems

This data is updated after the finalisation of the Taxing Wages publication for the corresponding year. This table reports average personal income tax and social security contribution rates for a single person without dependent, at various multiples (67%, 100%, 133%, 167%) of the AW/APW. The average wage (AW) by country and year can be found within the Taxing Wages comparative tables dataset, under the indicator heading: Total gross earnings before taxes (national currency). The AW is based on a single person at 100% of average earnings, no child. The results, derived from the OECD Taxing Wages framework (elaborated in the annual publication Taxing Wages), use tax rates applicable to the tax year. The results take into account basic/standard income tax allowances and tax credits and include family cash transfers (see Taxing Wages). The marginal rates are expressed as a percentage of gross wage earnings, with the exception of the Total tax wedge which is expressed as a percentage of gross labour costs (gross wages + employer SSC). The sub-central personal tax rates used in this table correspond to those used in Taxing Wages. The figures may differ from those published in Taxing Wages where updated information is available, such as revised AW/APW data. Further explanatory notes may be found in the Explanatory Annex.

The simple approach of comparing the tax/benefit position of example households avoids many of the conceptual and definitional problems involved in more complex international comparisons of tax burdens and transfer programmes. However, a drawback of this methodology is that the earnings of an average worker will usually occupy a different position in the overall income distribution in different economies, although the earnings relate to workers in similar jobs in various OECD Member countries. Because of the limitations on the taxes and benefits covered in the Report, the data cannot be taken as an indication of the overall impact of the government sector on the welfare of taxpayers and their families. Complete coverage would require studies of the impact of indirect taxes, the treatment of non-wage labour income and other income components under personal income taxes and the effect of other tax allowances and cash benefits. Complete coverage would also require that consideration be given to the effect on welfare of services provided by the state, either free or below cost, and the incidence of corporate and other direct taxes on earnings and prices. Such a broad coverage is not possible in an international comparison of all OECD countries. The differences between the results shown here and those of a full study of the overall impact on employees of government interventions in the economy would vary from one country to another. They would depend on the relative shares of different kinds of taxes in government revenues and on the scope and nature of government social expenditures. The Report shows only the formal incidence of taxes on employees and employers. The final, economic incidence of taxes may be quite different, because the tax burden may be shifted from employers onto employees and vice versa by market adjustments to gross wages. The income left at the disposal of a taxpayer may represent different standards of living in various countries because the range of goods and services on which the income is spent and their relative prices differ as between countries. In those countries where the general government sector provides a wide range of goods and services (generous basic old age pension, free health services, public housing, university education, etcetera), the taxpayer may be left with less cash income but may enjoy the same living standards as a taxpayer receiving a higher cash income but living in a country where there are fewer publicly provided goods and services.

This current Taxing Wages model has evolved from 2 earlier versions. The latest version is based on calculations for the Average Worker (AW) in the private sector (see glossary term), and the results are shown for 8 household types covering one- and two-earner families of varying size and different fractions of average gross wage earnings. There are 14 separate tax burden measures that describe the tax and benefit position of these families. This approach was first followed in the 2005-2006 Taxing Wages publication, which also applied these assumptions to calculate tax burden measures as of 2000. These assumptions have been applied since then in the more recent Taxing Wages publications and website databases. The first version of the Taxing Wages model (historical model A) was based on a more narrow definition of the average worker: the Average Production Worker (APW) solely from the manufacturing sector (see glossary term). It included only two of the current 8 family types, and the results are shown for only 3 of the existing 14 tax burden measures. This model was applied to data for years 1979-2004. The second version (historical model B) continued to use the Average Production Worker (APW) basis for its calculations, but was expanded to cover the full 8 family types that are currently used, and increased the number of tax burden measures to 12 of the 14 currently used. This model was applied to data for years 1997-2004.

Since new and young firms contribute critically to job creation, innovation and growth, observing recent trends of firm formation provides valuable information to policy makers. Seasonal adjustment: For the purpose of presentation of quarterly series, seasonal adjustment is applied using TramoSeats algorithm with 5 regressors: log/level, trading days, Easter, outlier detection, and automatic model identification). Series are log-transformed and decomposed into a trend component. Finally, index is calculated based on a 2007 (2007 = average of 2007 quarters) in order to present movements between the base year and a given quarter.

This table shows the top statutory personal income tax rate and top marginal tax rates for employees at the earnings threshold where the top statutory PIT rate first applies.

The lack of common definitions and practices to measure transport infrastructure spending hinders comparisons between countries and spending options. Data for road and rail infrastructure are the most comprehensive while data on sea port and airport spending are less detailed in coverage and definition. While our survey covers all sources of financing a number of countries exclude private spending, including Japan and India. Around 65% of countries report data on urban spending while for the remaining countries data on spending in this area are missing. Indicators such as the share of GDP needed for investment in transport infrastructure, depend on a number of factors, such as the quality and age of existing infrastructure, maturity of the transport system, geography of the country and transport-intensity of its productive sector. Caution is therefore required when comparing investment data between countries. However, data for individual countries and country groups are consistent over time and useful for identifying underlying trends and changes in levels of spending, especially for inland transport infrastructure. These issues of definitions and methods are addressed in a companion report Understanding the Value of Transport Infrastructure – Guidelines for macro-level measurement of spending and assets (ITF/OECD2013) that aims to improve the international collection of related statistics.

This data set is a combination of three tables, 1. Good Transport- Inland freight 2. Passenger transport 3. Transport Safety- Road injury accidents- Road CausalitiesThe geographical area covered is the ITF member countries.The International Transport Forum collects data on transport statistics on annual basis from all its Member countries. Data are collected from Transport Ministries, statistical offices and other institution designated as official data source.TEU (Twenty-foot Equivalent Unit): a statistical unit based on an ISO container of 20 foot length (6.10 m) to provide a standardised measure of containers of various capacities and for describing the capacity of container ships or terminals. one 20 Foot ISO container equals 1 TEU.  

This dataset contains data on the share of the five durations - less than 1 month, >1 month and < 3 months, >3 months and <6 months, >6 months and <1 year, 1 year and over - of unemployment among total unemployment by sex and by standardised age groups (15-19, 15-24, 20-24, 25-54, 55+, total).

This dataset presents national-level data on water made available for use, by sector. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)